User manual STRONG SRT 8526

[. . . ] Digitalni zemaljski HD prijemnik SRT 8526 Priručnik za uporabu User Manual USB snimanje HD programi Ručn. / Auto TV Info Pretraga liste favorita 4 Digitalni zvuk 30 Podsjetnika Titlovi MP3/JPG MPEG Simulacija slike PART 2 • English Table of Contents 1. 0 INTRODUCTION 1. 1 Safety Instructions 1. 2 Storage 1. 3 Equipment Set-up 1. 4 Accessories 1. 5 Usage of external USB devices 2. 0 Your receiver 2. 1 Front panel 2. 2 Rear panel 2. 3 Remote control 2. 4 Installing the batteries 2. 5 Using the remote control 3. 0 Connections 3. 1 Connecting to your aerial antenna 3. 2 Connecting to TV with HDMI cable 3. 3 Connecting to TV with SCART cable 3. 4 Connecting to TV with cinch cable 3. 5 Connecting to a digital audio amplifier 3. 6 Connecting to a digital A/V receiver and TV using HDMI 3. 7 Connecting an external USB storage device 4. 0 Starting up for the first time 4. 1 Antenna Adjustment 5. 0 Quick guide to using your receiver 5. 1 Changing channels 5. 2 Adjusting volume and audio 5. 3 Info Banner 5. 4 Electronic TV Programme Guide (EPG) 5. 5 Selecting subtitle language 5. 6 Displaying Teletext 5. 7 Using external USB storage devices 5. 8 Instant Recording 5. 9 Playback of recording 6. 0 Main Menu 6. 1 Programme Organizer 6. 2 Channel search 6. 3 System Setup 6. 4 Tools 6. 5 Records 6. 6 Multimedia 6. 7 Irdeto CA Status 7. 0 Troubleshooting 8. 0 Technical specification 9. 0 Appendix 18 Sep 2012 15:53 STRONG declares that this item complies with the basic requirements and other relevant regulations of directives CE 2004/108/EC and 73/23/EC, RoHS 2002/95/EC Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change. All other product names are trademarks or registered trademarks of their respective owners. All rights reserved. 2 2 3 3 3 4 4 4 4 4 5 6 6 6 6 6 6 6 6 7 7 7 8 8 8 8 9 10 10 10 10 11 11 11 12 13 16 17 19 20 21 23 24 1 English PART 2 • English ANY USE OF THIS PRODUCT IN ANY MANNER OTHER THAN PERSONAL USE THAT COMPLIES WITH THE MPEG-2 STANDARD FOR ENCODING VIDEO iRMATION FOR PACKAGED MEDIA IS EXPRESSLY PROHIBITED WITHOUT A LICENSE UNDER APPLICABLE PATENTS IN THE MPEG-2 PATENT PORTFOLIO, WHICH LICENSE IS AVAILABLE FROM MPEG LA, LLC, 6312 S. [. . . ] an active indoor/ outdoor antenna) and it requires a voltage of 5 V and doesn’t consume more than 60 mA, then you can set the antenna power to On. If you use an antenna without an amplifier or your antenna is already amplified by an external power supply or if you use an antenna from a house distribution system, please keep the antenna power Off. 6. 2. 2 Auto Search After selecting this menu item and pressing OK you will be asked to enter the PIN code (DEFAULT PIN: 0000) in order to update the current channel list. If you don’t want to perform a full channel scan you can press EXIT to cancel. After entering the PIN code (DEFAULT PIN: 0000) the receiver will perform an automatic channel search through all frequencies and after finishing this process it will update the channel list. During the search process the receiver will display the progress bar, the currently scanned frequency and the channel names. 6. 2. 3 Manual search In this menu you can search for channels on a specific frequency or channel. This menu requires knowledge of some parameters in order to search on the correct channel/frequency in your area. If you set the scan mode By Channel, then the following is available: Band: Use tu to choose UHF (Ultra High Frequency) or VHF (Very High Frequency). Frequency channel: Select a frequency channel on which you would like to search for the channels. If you set the scan mode By Frequency, then the following is available: Frequency: Use 0-9 to enter the frequency on which you would like to search for channels. Band: For the VHF frequency band commonly used 7 MHz, for UHF frequency 8 MHz is used. Signal level and quality indicators will help you ensure that you have signal on the selected frequency channel or frequency entered, as well as to adjust the antenna, if necessary. After you have entered the settings correctly you will need to select Search (directly above the signal bars) and press OK. The receiver will start to search for channels and if available with your entered parameters, they will be added to the channel list. If you don’t get a satisfying result after the search process, please contact the local service or check reliable websites/magazines if the entered values are correct. English 6. 3 System Setup Press MENU and use tu to select System Setup, then press OK. Following submenus will be displayed: Language Setting, Output Setting, Time Setting, Auto Standby, Parental Guidance and Reset Factory default. Use pq to select the desired submenu and press OK or u to access. 13 PART 2 • English 6. 3. 1 Language Setting In this menu you can set your language of choice for menu, audio and subtitles. Audio Language: Digital TV allows transmitting more than one audio track/ language. If a channel has multiple audio tracks/languages, the receiver will select the suitable audio track/language automatically according to your selection. Subtitle Language: This setting allows you to define the subtitle language. [. . . ] If the receiver does not work as you expect, please follow the steps outlined below. If after performing these operations, the receiver does not work well, contact your dealer or service centre in your area. This action will damage the warranty seals and warranty repairs will be denied. Problem The mode indicator does not light up Possible reason The power plug is not connected The receiver is connected to the main power through an extender and the power is OFF. [. . . ]