User manual STRONG SRT 8106

[. . . ] Digital Terrestrial HD Receiver SRT 8106 User manual Picture similar PART 1 • English Table of Contents 1. 0 Introduction 1. 1 Safety Instructions 1. 2 Storage 1. 3 Equipment Set-up 1. 4 Accessories 1. 5 Usage of external USB devices 2. 0 Your Receiver 2. 1 PIN-CODE DEFAULT: 0000 2. 2 Front Panel 2. 3 Rear Panel 2. 4 Remote Control 3. 0 Connection 3. 1 Connecting to a Terrestrial Antenna 3. 2 Connecting to TV with HDMI cable 3. 3 Connecting to TV with SCART cable 3. 4 Connecting to TV with Cinch cable 3. 5 Connecting to a Digital Audio Amplifier with S    DIF /P 3. 6 Connecting to a Digital Audio Amplifier and TV using HDMI 3. 7 Connecting a USB storage device 3. 8 Connecting to a TV using modulator output 4. 0 Starting up for the first time 5. 0 Quick guide to using your receiver 6. 0 Operation 6. 1 Changing channels 6. 2 Info Banner 6. 3 Selection of audio language 6. 4 Teletext 6. 5 Subtitles 6. 6 Time Shift 6. 7 EPG (Electronic Programme Guide) 6. 8 Instant Recording 7. 0 Main Menu 7. 1 Edit Channel 7. 2 Installation 7. 3 System Setup 7. 4 Tools 7. 5 Games 7. 6 Media+ 8. 0 Troubleshooting 9. 0 Technical Specifications STRONG declares that this item complies with the basic requirements and other relevant regulations of directives 2004/108/EC and 73/23/EC, RoHS 2002/95/EC Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change. All product names are trademarks or registered trademarks of their respective owners. All rights reserved. 2 2 2 3 3 3 3 3 3 4 4 5 5 5 5 5 5 6 6 6 6 7 7 8 8 8 8 9 9 9 9 9 9 11 12 14 16 16 18 19 14 Mar 2012 18:16 1 English PART 1 • English 1. 0 Introduction 1. 1 Safety Instructions DO NOT INSTALL YOUR RECEIVER: „„ a closed or poorly ventilated cabinet; directly on top of or under any other In equipment; on a surface which might obstruct the ventilation slots. [. . . ] (DEFAULT PIN: 0000) Locked channel will be marked with the  symbol. Locking/unlocking multiple channels in one session is possible. 7. 1. 4 Skipping channels Channels marked with Skip will be skipped when zapping channels with the pq buttons. Despite that, these channels are still available from the channel list. The Skip symbol on the top of the screen will move up to indicate that the Skip function is selected. Use pq to select the desired channel and press OK to mark or unmark it for skipping. Select Yes to save the changes or No to discard. 7. 1. 5 Moving channels To enable the Move function, press YELLOW while in TV Channel List. The Move symbol on the top of the screen will move up to indicate that the Move function is selected. You can now move the selected channel up or down the channel list using pq. Select Yes to save the changes or No to discard. 7. 1. 6 Editing channels 10 The Edit function allows you to Sort, Rename or Delete channels. The Edit Channel menu will appear. PART 1 • English Sort Press RED to enter the Sort menu. Use pq to select the desired sorting method and press OK to confirm. Possible methods are: Name (A-Z): Sorting in alphabetical order from A to Z. All Default:  Sorting by searched Order (from lowest to highest frequency or by LCN numbering). Use pq to highlight the desired channel and press OK to mark it for deletion. Once you have marked all channels you wish to delete, press EXIT twice. Select Yes to delete the marked channels or No to cancel. Basically, the operation of the Radio Channel List is the same as in the TV Channel List. The only difference is that in Radio Channel List there is no video information, so it will always display the radio logo at the right preview screen. 7. 1. 7 Radio Channel List 7. 1. 8 Delete all Use this menu to delete all stored channels. In the confirmation window select Yes with tu and press OK to delete or select No to cancel. Warning! The Delete all function will permanently delete all current channels and all favourite lists from your receiver, and you are not able to leave the menu until you search for channels again. 7. 2 Installation 7. 2. 1 Auto Scan Use pq to select Installation and press OK or u to advance. When FTA Only is set to Yes, scrambled channels won’t be stored in the channel list. The receiver will store all newly found channels in the channel list. 11 English PART 1 • English 7. 2. 2 Channel Scan Use pq to select Installation, press OK or u to advance. [. . . ] Use pq to highlight the recording you wish to play and press OK start playback. During playback, it is possible to perform the following actions: 2  pause the playback. RED  Press to stop playback and return to Record Manager. 7. 6. 2 Record Manager 16 PART 1 • English When the timer banner is on screen (activated by pressing u or INFO), the following actions are possible: tu and press OK to jump forwards and backwards in time during playback. 1 = Set marker point in play back, press again to delete marker point. [. . . ]