User manual STRONG SRT 8105 ECO

[. . . ] Digital High Definition Terrestrial Receiver SRT 8105 ECO User manual Picture similar PART 1 • English Table of Contents 1. 0 Introduction 1. 1 Safety Instructions 1. 2 Storage 1. 3 Equipment Set-up 1. 4 Accessories 1. 5 Usage of external USB devices 2. 0 Your Receiver 2. 1 PIN-CODE DEFAULT: 0000 2. 2 Front Panel 2. 3 Rear Panel 2. 4 Remote Control  3. 0 Connection 3. 1 Connecting to a Terrestrial Antenna 3. 2 Connecting to TV with HDMI cable 3. 3 Connecting to TV with SCART cable 3. 4 Connecting to TV with Cinch cable 3. 5 Connecting to a Digital Audio Amplifier with S/PDIF 3. 6 Connecting to a Digital Audio Amplifier and TV using HDMI  3. 7 Connecting a USB storage device 4. 0 Starting up for the first time  5. 0 Quick guide to using your receiver 6. 0 Operation 6. 1 Changing channels 6. 2 Info Banner 6. 3 Selection of audio language 6. 4 Teletext 6. 5 Subtitles 6. 6 Time Shift 6. 7 EPG (Electronic Programme Guide) 6. 8 Instant Recording 7. 0 Main Menu 7. 1 Edit Channel  7. 2 Installation 7. 3 System Setup 7. 4 Tools 7. 5 Games 7. 6 Media+  8. 0 Troubleshooting 9. 0 Technical Specifications STRONG declares that this item complies with the basic requirements and other relevant regulations of directives 2004/108/EC and 73/23/EC, RoHS 2002/95/EC Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change. All product names are trademarks or registered trademarks of their respective owners. All rights reserved. 2 2 2 3 3 3 3 3 3 4 4 5 5 5 5 5 5 5 6 6 7 7 7 8 8 8 8 8 8 9 9 9 11 12 14 15 15 18 19 18 Jan 2012 17:30 1 English PART 1 • English 1. 0 Introduction 1. 1 Safety Instructions DO NOT INSTALL YOUR RECEIVER: „„ a closed or poorly ventilated cabinet; directly on top of or under any other In equipment; on a surface which might obstruct the ventilation slots. [. . . ] Use p/q to select the desired channel and press OK to lock or unlock it. (DEFAULT PIN: 0000) Locked channel will be marked with the  symbol. Locking/unlocking multiple channels in one session is possible. 9 English PART 1 • English 7. 1. 1. 3 Skipping channels Channels marked with Skip will be skipped when zapping channels with the p/q buttons. Despite that, these channels are still available from the channel list. The Skip symbol on the top of the screen will move up to indicate that the Skip function is selected. Use p/q to select the desired channel and press OK to mark or unmark it for skipping. Select Yes to save the changes or No to discard. 7. 1. 1. 4 Moving channels To enable the Move function, press YELLOW while in TV Channel List. The Move symbol on the top of the screen will move up to indicate that the Move function is selected. You can now move the selected channel up or down the channel list using p/q. Select Yes to save the changes or No to discard. 7. 1. 1. 5 Editing channels The Edit function allows you to Sort, Rename or Delete channels. Possible methods are: Name (A-Z): Sorting in alphabetical order from A to Z. Free/Scramble: Lock: All unlocked channels will placed first in the list. Default: Sorting by searched Order (from lowest to highest frequency or by LCN numbering). Use p/q to highlight the desired channel and press OK to mark it for deletion. Once you have marked all channels you wish to delete, press EXIT twice. 10 PART 1 • English 7. 1. 3 Delete all Use this menu to delete all stored channels. In the confirmation window select Yes with t/u and press OK to delete or select No to cancel. Warning: The Delete all function will permanently delete all current channels and all favourite lists from your receiver, and you are not able to leave the menu until you search for channels again. 7. 2 Installation Use p/q to select Installation and press OK or u to advance. When FTA Only is set to Yes, scrambled channels won’t be stored in the channel list. The receiver will store all newly found channels in the channel list. 7. 2. 1 Auto Scan Use p/q to select Installation, press OK or u to advance. Use t/u to toggle between available scan modes: By Channel and By Frequency. If By Channel is selected, use the cursor buttons to select Scan Band and Channel No. [. . . ] Select Media Player from the Media+ menu and press OK to proceed. 15 English PART 1 • English Use p/q browse the connected USB device and use OK to open maps. The help banner at the bottom of the screen explains all buttons used in the Media player. Note: You can also access the Media Player from viewing mode with the FILE key on the remote control. The Record Manager gives you access to previously recorded events. Use p/q to highlight the recording you wish to play and press OK start playback. [. . . ]