User manual SONY ZS-PS20CP

[. . . ] 3-878-117-11(1) Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems) This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. By ensuring these batteries are disposed of correctly, you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery. The recycling of the materials will help to conserve natural resources. In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. [. . . ] For details, refer to the instruction manual of the component to be connected. 1 Connect the AUDIO IN jack on the unit to the line output jack of the portable digital music player or other components using an audio connecting cable (not supplied). . Lock 3 + on the unit to go forward and ­ to go backward . (forward) or (backward) on the unit while playing and Push the Sliding Tray into the unit until it clicks. Notes Do not carry the unit with a USB device inserted to the connector. Be sure to store the Sliding Tray before moving the unit. Doing so may cause a malfunction. 2 Turn the unit and the connected component on. 3 Press AUDIO IN and start playing sound on the hold it until you find the point. (forward) or (backward) on the unit in pause and hold it connected component. The sound from the connected component is output from the speakers. until you find the point. PUSH OPEN/CLOSE . To connect the unit to a TV or VCR, use an extension cable (not supplied) with a stereo-mini jack on one end and two phono plugs on the other end. Other Operations Using the display You can check information about the CD using the display. Precautions Playing tracks/MP3/WMA files in random order (Shuffle Play) You can play tracks/MP3/WMA files in random order. When you select Folder Shuffle Play (MP3/WMA disc only), press MODE on the unit until " " and "SHUF" appear in the display. 3 Press to start Shuffle Play. Troubleshooting General The power is not on. Connect the AC power cord to the wall outlet securely. You cannot turn on the unit with the remote when you USB device Are you using a compatible USB device? If you connect an incompatible USB device, the Playing preset radio stations 1 Press RADIO repeatedly on the unit to select the band. Discs that this unit CAN play Audio CD CD-R/CD-RW (CD-DA*/MP3/WMA files) * CD-DA is the abbreviation for Compact Disc Digital Audio. It is a recording standard used for Audio CDs. Checking the information of an audio CD To check the total track number and playing time of the CD Press to stop the CD playback. 2 Press PRESET + or ­ on the unit to tune in the stored station. Discs that this unit CANNOT play CD-R/CD-RW other than those recorded in music CD Falling asleep to music 1 Play the music source you want. 3 Press SLEEP to select the minutes until the unit format, WMA format and MP3 format conforming to ISO9660 Level 1/Level 2 or Joliet CD-R/CD-RW of poor recording quality, CD-R/CD-RW that has scratches or is dirty, or CD-R/CD-RW recorded with an incompatible recording device CD-R/CD-RW which is incorrectly finalized operate the unit on batteries. following problems may occur. See "Playable USB devices" for a list of devices that are supported. ­ The sound output is distorted. There is no audio. Unplug the headphones when listening through "OVER CURRENT" appears. An abnormal level has been detected in the electrical speakers. Total track number Total playing time To cancel Shuffle Play Stop playing first. Then press MODE until "SHUF" disappears from the display. Tips During Shuffle Play, you cannot select the previous track/MP3/ The resume function does not work during Shuffle Play. Checking the information of an MP3/WMA disc To check the total folder number on the CD Press to stop the CD playback. (Example: When you place MP3 disc) WMA file by pressing . goes off automatically. Each time you press the button, the indication changes as follows: "AUTO*" "60MIN" "30MIN" "20MIN" "10MIN" "OFF". * When you select "AUTO", the CD and USB stops playing in 90 minutes at most and the unit goes off automatically. When you are listening to the radio and audio in, the unit goes off in 90 minutes. Notes on discs Before playing, clean the CD with a cleaning cloth. Noise is heard. Someone is using a portable telephone or other current from the (USB) port . If there is a scratch, dirt or fingerprints on the CD, it may cause a tracking error. equipment that emits radio waves near the unit. Move the portable telephone, etc. , away from the unit. There is no sound. The USB device is not connected correctly. Turn off the CD/MP3/WMA player The CD does not play or "NO DISC" is displayed even when a CD is in place. Place the CD with the label surface up. Take out the CD and leave the CD compartment open for about an hour to dry moisture condensation. There is a problem with the quality of the CD-R/ CD-RW, recording device or application software. Replace all the batteries with new ones if they are weak. unit and reconnect the USB device. Then turn on the unit and check whether the "USB MEMORY" lights up or not in the display. There is noise, skipping, or distorted sound. Turn off the unit and reconnect the USB device. [. . . ] 1 Press MODE until " To clear the program you set Press . "NO STEP" appears in the display for 2 seconds, and the same display information as when inserting a CD appears. Tips You can play the same program again, since the program is saved, The resume function does not work during Program Play. devices. Some of these USB devices may not be available for purchase in certain areas. Playback of Windows Media Audio/AAC files with copyright protection is not supported. [. . . ]