User manual SONY XR-4900

[. . . ] If no power is being supplied to the unit, check the connections first. If no sound comes from the speakers of a two-speaker system, set the fader control to the centre position. When a tape is played back for a long period, the cassette may become warm because of the built-in power amplifier. If you have any questions or problems concerning your unit that are not covered in this manual, please consult your nearest Sony dealer. [. . . ] Note If you try to store another station on the same number button, the previously stored station will be erased. Each time you press (MODE), the band changes as follows: Press (MENU), then press either side of (PRST/DISC) or (PRST) repeatedly until "BTM" appears. The unit stores stations in the order of their frequencies on the number buttons. If only a few stations can be received, some number buttons will retain their former setting. When a number is indicated in the display, the unit starts storing stations from the one currently displayed. Press the number button ((1) to (6)) on which the desired station is stored. During radio reception, press (MENU), then press either side of (PRST/DISC) or (PRST) repeatedly until "MONO" appears. Tip Press either side of (PRST/DISC) or (PRST) to receive the stations in the order they are stored in the memory (Preset Search Function). in the Motion Display mode , all the items are scrolled in the display one by one in order. Press either side of (SEEK/AMS) to search for the station (automatic tuning). Press either side of (SEEK/AMS) repeatedly until the desired station is received. To cancel all traffic announcements, turn off the function by pressing (TA) until "TA-OFF" appears. Within five seconds, press the number button of the local station again. You can preset the volume level of the traffic announcements beforehand so you won't miss the announcement. When a traffic announcement starts, the volume will be automatically adjusted to the preset level. The Traffic Announcement (TA) and Traffic Programme (TP) data let you automatically tune in an FM station that is broadcasting traffic announcements even if you are listening to other programme sources. "TP" appears in the display when the unit finds a station broadcasting traffic announcements. During radio reception, press (MENU), then press either side of (PRST/DISC) or (PRST) repeatedly until "CT" appears. Depending on how you mount the rotary commander, attach the appropriate label as shown in the illustration below. The CT function may not work even though an RDS station is being received. There might be a difference between the time set by the CT function and the actual time. Using the rotary commander the rotary commander works by pressing buttons and/or rotating controls. [. . . ] Note For some discs with very many characters, the following cases may happen: -- Some of the characters are not displayed -- Auto Scroll does not work. During playback, press either side of (SEEK/AMS) momentarily for each track you want to skip. During playback, press (1) (REP) repeatedly until the desired setting appears. Playing tracks in random order -- Shuffle Play SHUF-2 ­ to play the tracks in the current unit in random order. [. . . ]