User manual SONY XAV-72BT

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. , declares that this XAV72BT is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. De/ Italy: Use of the RLAN network is governed: ­ with respect to private use, by the Legislative Decree of 1. 105 indicates when free use is permitted; ­ with respect to the supply to the public of the RLAN access to telecom networks and services, by the Ministerial Decree 28. [. . . ] The procedure to search for this unit from the other Bluetooth device is explained below. To select Bluetooth Audio, touch "Source List, " then "BT Audio. " In the case of Bluetooth Audio, touch "Play Menu, " then "BT Menu. Touch "Signal, " then "Yes" to set "Signal" to "ON. " This unit is ready to be detected by the other Bluetooth device. While connecting to a Bluetooth device, this unit cannot be detected from another device. Depending on the device, searching from this unit may not be possible. If you search from this unit and another device at the same time, this unit will not recognize the other device. Depending on the device, the connection confirmation display may appear before inputting the passkey. This unit cannot be connected to a device that supports only HSP (Head Set Profile). When the ignition is turned to on with the Bluetooth signal activated, this unit searches for the last-connected Bluetooth device, and connection is made automatically if possible. This chapter explains how to connect manually to registered Bluetooth devices. Before starting, be sure to activate the Bluetooth signal both on this unit (page 45) and the other Bluetooth device. 2 Touch the device to delete, then touch "Delete this device from List. Touch "Source List, " "BT Audio, " then "Connect. " Note If connection is made during audio streaming, noise may occur over playback sound. Tip You can connect a cellular phone for audio streaming if it supports A2DP (Advanced Audio Distribution Profile). To select Bluetooth Audio, touch "Source List, " then "BT Audio. " In the case of Bluetooth Audio, touch "Play Menu, " then "BT Menu. When connection is made successfully, or appears at the bottom of the display. In the device list, the currently connected device is indicated by the icon at the head of its name. Once the unit is connected to the cellular phone, you can make/receive handsfree calls by operating this unit. [. . . ] Phone sound quality depends on reception conditions of the cellular phone. T Move your car to a place where you can enhance the cellular phone's signal if the reception is poor. The USB device contains large-sized files or files with a complicated tree structure. T Before disconnecting a USB device, make sure to stop playback first for data protection. [. . . ]