User manual SONY WX-C570R

[. . . ] With Optional Equipment CD/MD unit Playing tracks in random order -- Shuffle Play . Listening to each program source in its registered surround mode -- Source Sound Memory (SSM) . The buttons of the wireless remote work the same functions as those on this unit. 1 OFF button 2 SEEK/AMS button 3 (­) (+) buttons 4 MUTE button 5 SOUND button 6 DSPL button 7 PRESET/DISC button You cannot do manual search and manual tuning with the remote. [. . . ] Press either side of (SEEK/AMS) momentarily to search for the station (automatic tuning). Press either side of (SEEK/AMS) repeatedly until the desired station is received. Note If the automatic tuning stops too frequently, press (SHIFT), then press (9) (P MODE) repeatedly until "Local" (local seek mode) is displayed. Tip If you know the frequency of the station you want to listen to, press and hold either side of (SEEK/AMS) for two seconds until the desired frequency appears (manual tuning). If you want to put a blank space between characters, select "_" (underbar). Press (SHIFT), then press (9) (P MODE) repeatedly until "Mono" appears. To go back to normal mode, select "Mono off" in step 2 above. Each time you press (DSPL), the item changes as follows: Tip To erase/correct a name, enter "_" (under-bar) for each character. Each time you press (DSPL), the item changes as follows: Tune in any station and press (LIST) for two seconds. Note After the station name or frequency has been displayed for five seconds, the display goes back to normal mode. Once you have registered the desired the sound characteristics (equalizer and subwoofer) onto a disc, you can enjoy the same surround menu every time you play that disc. You can label a personalized name for CDs and CD TEXT discs with the disc memo function, refer to "Labeling a CD" (page 21). Tip If the name of the MD or CD TEXT disc is too long, you can scroll it across the display window by pressing (SCRL) while the disc name or track name is displayed. The disc name appears when the disc has changed (if the disc name is selected). ⷠThe track name appears when the track has changed (if the track name is selected). ⷠThe disc or track name appears depending on the setting when you press (CD/MD) to select an MD or CD TEXT disc. If you press (DSPL) to change the display item, the disc or track name of the MD or CD TEXT disc is scrolled automatically whether you set the function on or off. Press the number button that corresponds with the desired disc number. You can play the first 10 seconds of all the tracks on the current disc. Note For some CD TEXT discs with extremely many characters, the following cases may happen: -- Some of the characters are not displayed. You can use this function for discs that have been assigned a custom name. For more information on disc names, refer to "Labeling a CD" (page 21). [. . . ] Cassettes longer than 90 minutes The use of cassettes longer than 90 minutes is not recommended except for long continuous play. The tapes used for these cassettes are very thin and tend to be stretched easily. Frequent playing and stopping of these tapes may cause them to be pulled into the cassette deck mechanism. Do not touch the tape surface of a cassette, as any dirt or dust will contaminate the heads. [. . . ]