Detailed instructions for use are in the User's Guide.
[. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: s s s s Reorient or relocate the receiving antennas. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] identify equipment connected to the TV You cannot record the signal from any equipment connected into the Y, PB, PR jacks.
43
Digital Satellite Receiver with DVI-HDTV connector
To connect a digital Satellite Receiver with DVI-HDTV connector
1 Use a DVI-D single link cable to connect the Digital Satellite Receiver's
DVI-HDTV connector to the TV's DVI-HDTV connector.
The DVI-HDTV VIDEO connector does not provide audio, so audio cables must be connected to provide sound.
2 Use an audio cable to connect the Digital Satellite Receiver's audio
output jacks to the TV's DVI-HDTV AUDIO jacks.
Setup
Rear of Media receiver unit
RAUDIOL
(VAR/FIX)
VHF/UHF SUBWOOFER OUT
(VAR)
TO CONVERTER
AUX
AUDIO OUT
1
DVIHDTV
RAUDIOL
6
3 WHITE RAUDIOL VIDEO VIDEO IN S VIDEO
DVIHDTV IN BLACK
DISPLAY SIGNAL OUT
Digital Satellite Receiver
VIDEO OUT (480i) VIDEO OUT (1080i/720p/480p)
DVI-D single link cable
1 OPTICAL AUDIO OUT L1
2 Y
AUTHORIZED SERVICES ONLY
L2
PB TYPE
RGB OUT
DVI-HDTV OUT
OPTICAL S. VIDEO
R1
R2
AUDIO OUT
PR
(1080i/720p/480p)
(1080i/720p/480p)
Audio cable
Notes on Using This Connection
To Do This . . . Do This . . .
Watch the digital satellite receiver Press TV/VIDEO repeatedly to select the digital satellite receiver input (VIDEO 6 in the illustration). Label video inputs to easily See the instructions for setting up Video Labels on page 90. identify equipment connected to the TV
44
Camcorder
For easy connection of a camcorder, the TV has front A/V input jacks. If you prefer, however, you can connect the camcorder to the TV's rear A/V input jacks.
To connect a camcorder
Use an A/V cable to connect the camcorder's A/V output jacks to the TV's A/V input jacks.
Using S VIDEO jacks?See page 29.
Setup
Media receiver unit Front Video Panel
VIDEO
VIDEO
LAUDIOR
VIDEO 2 INPUT
A/V cable
Camcorder To A/V output
Notes on Using This Connection
To Do This . . . Do This . . .
Watch the camcorder Label video inputs to easily identify equipment connected to the TV
Press TV/VIDEO repeatedly to select the camcorder input (VIDEO 2 INPUT in the illustration). See the instructions for setting up Video Labels on page 90.
45
Audio Receiver
For improved sound quality, you may want to play the TV's audio through your stereo system.
To connect an audio system
1 Use an audio cable to connect the TV's audio output jacks to the audio
receiver's line input jacks.
Rear of Media receiver unit
Setup
RAUDIOL
(VAR/FIX)
AUDIO OUT
SUBWOOFER OUT
(VAR)
Receiver
1
3
RAUDIOL
VIDEO VIDEO IN
S VIDEO
To line input
Audio cable
2 Using the TV's Audio Menu, set the Speaker option to Off. Then set
the Audio Out option to Fixed or Variable, depending on how you want to control the volume. For details, see "Using the Audio Menu" on page 80.
3 Turn on the audio receiver, and then set the receiver's line input to the
jack into which you connected the TV.
46
Sub Woofer
Use a monaural audio cable to connect the TV's SUB WOOFER OUT jack to the sub woofer's input jack.
Monaural audio cable (not supplied)
RAUDIOL
(VAR/FIX)
VHF/UHF SUBWOOFER OUT
(VAR)
TO CONVERTER
AUX
AUDIO OUT
Sub woofer input
Setup
Sub woofer
1 DVIHDTV RAUDIOL 6
3 WHITE RAUDIOL VIDEO VIDEO IN S VIDEO
DVIHDTV IN BLACK
DISPLAY SIGNAL OUT
Rear of Media receiver unit
47
Using the CONTROL S Feature
CONTROL S allows you to control your system and other Sony equipment with one remote control. Press repeatedly to cycle through the Multi-channel TV Sound (MTS) options: Stereo, Auto SAP, and Mono. To scan quickly through channels, press and hold down either CH.
wa CH +/
53
Programming the Remote Control
The remote control is preset to operate Sony brand video equipment.
Sony Equipment Programmable Code Number
Beta, Ed Beta VCRs 8 mm VCR VHS VCR DVD player
303 302 301 751
If you have video equipment other than Sony brand that you want to control with the TV's remote control, use the following procedure to program the remote control.
The equipment must have infrared (IR) remote capability in order to be used with the remote control.
1 Turn to the list of "Manufacturer's Codes" on page 55, and find the Remote Control
three-digit code number for the manufacturer of your equipment. (If more than one code number is listed, use the number listed first. )
2 Press FUNCTION repeatedly until the DVD/VCR or SAT/CABLE
indicator lights up.
3 While the desired indicator is lit, enter the three-digit manufacturer's
code number.
4 Press ENTER.
You must do step 4 within 10 seconds of step 3, or you must redo steps 3 through 4.
5 To check if the code number works, aim the TV's remote control at the
equipment and press POWER that corresponds with that equipment. If not, try using another code listed for that manufacturer.
Notes
s If more than one code number is listed, try entering them one by one until you come to the correct code for your equipment. s If you enter a new code number, the code number you previously entered at that setting is erased. s In some cases, you may not be able to operate your equipment with the supplied remote control. s Whenever you remove the batteries to replace them, the code numbers may revert to the factory setting and must be reset.
54
Manufacturer's Codes VCRs Manufacturer Sony Admiral (M. Ward) Aiwa Audio Dynamic Broksonic Canon Citizen Craig Criterion Curtis Mathes Daewoo DBX Dimensia Emerson Code 301, 302, 303 327
Manufacturer Olympic Optimus Orion Panasonic Pentax Philco Philips Pioneer Quasar RCA/ PROSCAN Realistic Sansui Samsung Sanyo Scott
338, 344 314, 337 319, 317 309, 308 332 302, 332 315 304, 338, 309 341, 312, 309 314, 336, 337 304 319, 320, 316, 317, 318, 341 Fisher 330, 335 Funai 338 General Electric 329, 304, 309 Go Video 322, 339, 340 Goldstar 332 Hitachi 306, 304, 305, 338 Instant Replay 309, 308 JC Penney 309, 305, 304, 330, 314, 336, 337 JVC 314, 336, 337, 345, 346, 347 Kenwood 314, 336, 332, 337 LG 332 LXI (Sears) 332, 305, 330, 335, 338 Magnavox 308, 309, 310 Marantz 314, 336, 337 Marta 332 Memorex 309, 335 Minolta 305, 304 Mitsubishi/ 323, 324, 325, MGA 326 Multitech 325, 338, 321 NEC 314, 336, 337
Sharp Signature 2000 (M. Ward) SV2000 Sylvania Symphonic Tashiro Tatung Teac Technics Toshiba Wards Yamaha Zenith
Code 309, 308 327 317 308, 309, 306, 307 305, 304 308, 309 308, 309, 310 308 308, 309, 306 304, 305, 308, 309, 311, 312, 313, 310, 329 309, 330, 328, 335, 324, 338 314 322, 313, 321 330, 335 312, 313, 321, 335, 323, 324, 325, 326 327, 328 338, 327 338 308, 309, 338, 310 338 332 314, 336, 337 314, 336, 338, 337 309, 308 312, 311 327, 328, 335, 331, 332 314, 330, 336, 337 331
DVD Players
Manufacturer Code
Sony General Electric Hitachi JVC Magnavox Mitsubishi Oritron Panasonic Philips Pioneer RCA/Proscan Samsung Toshiba Zenith Cable Boxes
Manufacturer
751 755 758 756 757 761 759 753 757 752 755 758 754 760
Remote Control
Code
Sony Hamlin/Regal
230 222, 223, 224, 225, 226 Jerrold/G. 201, 202, 203, 204, 205, 206, 207, 208, 218 Oak 227, 228, 229 Panasonic 219, 220, 221 Pioneer 214, 215 Scientific Atlanta 209, 210, 211 Tocom 216, 217 Zenith 212, 213 Satellite Receivers
Manufacturer Code
Laserdisc Players
Manufacturer Code
Sony Panasonic Pioneer
701 704, 710 702
Sony Dish Network Echostar General Electric Hitachi Hughes Mitsubishi Panasonic RCA/ PROSCAN Toshiba
801 810 810 802 805 804 809 803 802, 808 806, 807
55
Using Other Equipment with Your TV Remote Control
All Equipment
To Do This . . . Do This . . .
Switch the TV's input to the VCR, DVD player, or other connected equipment Set up the TV remote control to operate non-Sony equipment
Press TV/VIDEO repeatedly to cycle through the video equipment connected to the TV's video inputs. [. . . ] Make sure the Speaker option is set to On in the Audio Menu (see page 81). Communication problems may occur if the infrared communication equipment (e. g. , infrared cordless headphones) is used near the TV. Also, if you use the infrared communication equipment other than infrared cordless headphones, move the infrared transceiver away from the TV until the noise is eliminated, or move the transmitter and receiver of the infrared communication equipment closer together. Increase the volume of the cable box using the cable box's remote control. [. . . ]