User manual SONY SS-RXD10AV

[. . . ] Please refer to the manual provided for SA-VE835ED, SA-VE535H, SAVE335 and SA-VE445H when you connect this speaker to the other speakers of SA-VE835ED, SA-VE535H, SAVE335 and SA-VE445H. Any difference in operation is clearly indicated in the text, for example, "SS-V831ED only". [. . . ] Make sure power to all components (included the subwoofer) is turned off before starting the hook-up. Attach the speaker to supplied speaker stand and place them at their optimum locations. Make sure the plus (+) and the minus (­) terminals on the speakers are matched to the corresponding plus (+) and minus (­) terminals on the amplifier. ⷠBe sure to tighten the screws of the speaker terminals securely as loose screws may become a source of noise. Contact between bare speaker wires at the speaker terminals may cause a short-circuit. ⷠContact between bare speaker wires at the speaker terminals may result in a short-circuit. ⷠBefore connecting, turn off the amplifier to avoid damaging the speaker system. This speaker system is magnetically shielded to allow it to be installed near a TV set. However, color irregularities may still be observed on certain types of TV sets. Do not place the speakers in locations that are: -- Extremely hot or cold -- Dusty or dirty -- Very humid -- Subject to vibrations -- Subject to direct sunlight · Use caution when placing the speaker on a specially treated (waxed, oiled, polished, etc. [. . . ] Do not place the speakers in locations that are: -- Extremely hot or cold -- Dusty or dirty -- Very humid -- Subject to vibrations -- Subject to direct sunlight · Use caution when placing the speaker on a specially treated (waxed, oiled, polished, etc. Clean the speaker cabinets with a soft cloth lightly moistened with a mild detergent solution or water. [. . . ]