User manual SONY SRS-BTX500

[. . . ] 4-457-524-21(1) Tip  When the system is turned on first time, the Bluetooth indicator (blue) starts flashing quickly. Tips VOLUME −/+ buttons SOUND button/ indicator Personal Audio System Operating Instructions Mode d’emploi  If it is difficult to establish the connection, try the following. € Activate the app “NFC Easy Connect” and move the smartphone slightly on the N marked part of the system. Ώ If you have multiple NFC compatible devices, just touch the smartphone to a different device to switch the connection to that device. [. . . ] Ώ Hands-free calling is not available while you are listening to music from a device connecting to the system by the connected cord. 1 Make the Bluetooth connection between the system and the mobile phone. For details on the Bluetooth connection procedure, see “How to Make Wireless Connection with Bluetooth Devices. € When the Bluetooth connection is established, the Bluetooth indicator (blue) on the system stays on. Ώ If you have any questions or problems concerning this system that are not covered in this manual, please consult your nearest Sony dealer. Notes Pairing is not possible Bring this system and the Bluetooth device to within 1 m of each other. If the Bluetooth indicator (blue) is not flashing quickly, press and hold the BLUETOOTH-PAIRING button on the system until two beeps are heard. 2 Start playback on the Bluetooth mobile phone, then adjust the volume. Set the volume of the Bluetooth mobile phone to a moderate level, and press the VOLUME –/+ buttons on the system. Bluetooth wireless technology is a short-range wireless technology that enables wireless data communication between digital devices, such as a computer and digital camera. Connecting two devices as necessary is common, but some devices can be connected to multiple devices at the same time. You do not need to use a cable for connection, nor is it necessary for the devices to face one another, such is the case with infrared technology. Bluetooth standard is an international standard supported by thousands of companies all over the world, and employed by various companies worldwide. Check that a dialing tone is heard on the system and talk using the microphone. If no dialing tone is heard, press the (call) button on the system for about 2 seconds to change the call device to the system. The system automatically turns off after about 20 minutes when the hands-free is not being used (the system is not connected with a Bluetooth device via HFP/HSP), and when no device is being charged via the DC OUT ONLY connector, and when no music is being played. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. [. . . ] For the State of California, USA only Notes Perchlorate Material - special handling may apply, See www. On Copyrights and Licenses The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ]