User manual SONY SMO-F551 INSTRUCTION/OPERATION MANUAL

[. . . ] Safety Regulations Owner's Record The model and serial numbers are located on the top of the drive. [. . . ] Using a lens cleaning cartridge may damage the drive. This label is located on the drive unit's internal chassis. Dieses Etikett befindet sich auf dem inneren Chassis des Laufwerkes. Specifications Operating environment Installation ±10° Temperature Operating 5 °C to 45 °C (gradient 10° C/h or 18 °F/h) Relative humidity Operating 10 % to 90 % (no condensation) Power supply and others Power supply +5 V ±5%, 0. 8 A (typ. ) +12 V ±5%, 0. 9 A (typ. ) Dimensions 41. 3 × 146. 0 × 203. 0 mm (H×W×D) (without Front Panel) Weight 1. 5 kg Design and specifications are subject to change without notice. Cooling Requirements Forced-air cooling is required throughout the drive, preventing overheat of the drive mechanism and electrical components. This maximum temperature is applicable to all operating conditions specified in this manual. Measuring Point Disk Cartridge Maximum Temperature 55 °C (131 °F) This MO drive is classified as a CLASS 1 LASER PRODUCT. CLASS 1 LASER PRODUCT LASER KLASSE 1 PRODUKT LUOKAN 1 LASERLAITE KLASS 1 LASER APPARAT CAUTION ATTENTION VORSICHT ADVARSEL ADVARSEL VARNING VARO! CLASS 3B LASER RADIATION WHEN OPEN. VÄLTÄ SUORAA ALTISTUMISTA SÄTEELLE. The temperature conditions specified in this manual must always be met for the SMO-F551 series to function properly. These labels are located on the top of the drive unit enclosure. Diese Etiketten befinden sich an der Oberseite des Laufwerksgehäuses. Compatible Media The SMO-F551 series is compatible with the following 5 1/ 4 inch (130 mm) Magneto Optical Disks. Model name SMO-F551 series Compatibility Read Write ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® × ® × ® × ® × ® × ® × ® × ® × ® ® ® ® ® ® ® ® ® × ® × ® × ® × ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® Type 8× R/W 8× R/W 8× R/W 8× WO 8× WO 8× WO 4× R/W 4× R/W 4× WO 4× WO 4× DOW 4× DOW 2× R/W 2× R/W 2× WO 2× WO 1× R/W 1× R/W 1× WO 1× WO 2× R/W 2× R/W 2× WO 2× WO 1× R/W 1× R/W 1× WO 1× WO 2× R/W 2× R/W 2× WO 2× WO 1× R/W 1× R/W 1× WO 1× WO Description 5. 2GB 2048 4. 8GB 1024 4. 1GB 512 5. 2GB 2048 4. 8GB 1024 4. 1GB 512 2. 6GB 1024 2. 3GB 512 2. 6GB 1024 2. 3GB 512 2. 6GB 1024 2. 3GB 512 1. 3GB 1024 1. 2GB 512 1. 3GB 1024 1. 2GB 512 650MB 1024 594MB 512 650MB 1024 594MB 512 1. 3GB 1024 1. 2GB 512 1. 3GB 1024 1. 2GB 512 650MB 1024 594MB 512 650MB 1024 594MB 512 1. 3GB 1024 1. 2GB 512 1. 3GB 1024 1. 2GB 512 650MB 1024 594MB 512 650MB 1024 594MB 512 bytes/sector bytes/sector bytes/sector bytes/sector bytes/sector bytes/sector bytes/sector bytes/sector bytes/sector bytes/sector bytes/sector bytes/sector bytes/sector bytes/sector bytes/sector bytes/sector bytes/sector bytes/sector bytes/sector bytes/sector bytes/sector bytes/sector bytes/sector bytes/sector bytes/sector bytes/sector bytes/sector bytes/sector bytes/sector bytes/sector bytes/sector bytes/sector bytes/sector bytes/sector bytes/sector bytes/sector ISO Standard ISO/IEC 15286 (working draft) Configuration and Location of Parts System Configuration The SMO-F551 series is connected to a host computer through its SCSI interface. The maximum of seven peripheral devices can be linked as a daisy chain on the SCSI bus. Host Computer SCSI Cable Switch setting and Assignments Functional Switch Connector Pin Assignments A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 SCSI ID2 SCSI ID1 SCSI ID0 Disable SCSI Parity Disable Write Cache Disable Auto Spin-up Force Verify for Write command Disable Manual Eject Enable Fast SCSI Device Type Enable Termination Terminator Power B1 B2 B3 B4 B5* B6* B7* B8* B9* B10* B11 B12 GND GND GND GND Reserved Reserved Reserved Reserved Reserved Reserved GND Terminator Power Source SCSI Terminator The SMO-F551 series features an internal SCSI bus terminator. When the drive is connected at the end of the SCSI chain, functional switch #11 (Enable Terminator) may be used to terminated the SCSI connection. For a single ended cable, 50-signal conductor flat cable or a 25-signal twisted cable can be used. [. . . ] Recommended female connectors: SCSI connector: 3M type number 7950-6500 DC Power connector: AMP 1-480424-0 MATE-N-LOCK Functional Switch B1 A1 B12 2 A12 SCSI Connector DC Power Connector 50 4 1 1 49 SCSI and DC Power Connector The bar "--" above the signal indicates active low. [. . . ]