User manual SONY SA-40SE1

[. . . ] As an ENERGY STAR® partner, Sony Corporation has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. For customers in the United States Owner's Record The model and serial numbers are located on the bottom of the unit. Refer to them whenever you call upon your Sony dealer regarding this product. These following indications are located on the bottom exterior of the AC Adaptor. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. 2GB Important Safety Instructions 1) 2) 3) 4) 5) 6) 7) Read these instructions. [. . . ] 9 Installing a battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Hooking up the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Installing the unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Supplied accessories · Operating Instructions (this manual) · Compatible list (Except for China model) (1) · Remote control (RM-ANU102) (1) Listening to TV sound from the speaker of the unit . . . . . . . . . . . . . . . . . . . . 13 Listening to TV sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Control the volume of the unit by adjusting the TV volume. . . . . . . . . . . . . . . . . . . . . . 13 · R03 batteries (size AAA) (2) · Audio cord (1) Selecting the sound field. . . . . . . . . . . . 16 POWER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 SOUND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 REMOTE CONTROL. . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 OTHER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 · Plug adaptor (1) Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 · AC adaptor (1) · AC power cord (mains lead) (1) · Foot pads (4) 6GB Guide to parts and controls Supplied accessories/Guide to parts and controls This manual mainly explains operations using the buttons on the remote control, but the same operations can also be performed using the buttons on the unit having the same or similar names. Unit 45 6 1 2 3 Remote control (RM-ANU102) A ?/1 (POWER) button B SOUND FIELD button Selects the sound field (page 14). Unit: Each time you press the button, the sound field changes cyclically as follows: STANDARD t MOVIE t GAME/VOICE t STANDARD t . . . C Unit: 2 +*/­ button Remote control: VOL 2 +/­ button Adjusts the volume. * The 2 + button on the unit has tactile dots. Use the tactile dots as references when operating the unit. 9 8 1 2 7 3 D Remote control sensor Receives signals from remote control. continued 7GB E STANDBY indicator Lights up in red when the unit is in standby mode. Notes · While the unit is in the standby mode, the unit turns on when a sound of a TV is detected. · The unit enters the standby mode automatically when there is no sound input from a TV for about 5 minutes. When the volume level is set to maximum or minimum, the indicator flashes 6 times in quick succession. If you are using a Sony TV, the G ­ I operations can be performed with the remote control of the unit. I TV INPUT t button Selects the TV input. 8GB Getting started Installing a battery Slide and remove the battery compartment lid, and insert the two supplied R03 (size AAA) batteries, E side first, matching the polarities shown below. Getting started Notes · Do not mix an old battery with a new one or mix different types of batteries. · Do not leave the remote control in an extremely hot or humid place. · Do not expose the remote control sensor to direct sunlight or lighting apparatuses. · If you do not intend to use the remote control for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion. · When the remote control no longer operates the unit, replace both batteries with new ones. See the illustrations below. 5 mm (7/32 in) 4 mm (3/16 in) more than 25 mm (1 in) 10 mm (13/32 in) Hook on the rear of the unit 2 Fasten the screws to the wall. See the illustration below. 310 mm (12 1/4 in) (For SA-32SE1) or 320 mm (12 5/8 in) (For SA-40SE1/SA-46SE1) 7 mm to 8 mm (9/32 in to 11/32 in) (For SA-32SE1) or 8 mm to 9 mm (11/32 in to 3/8 in) (For SA-40SE1/ SA-46SE1) 3 Hang the unit onto the screws. Align the holes on the rear of the unit to the screws, then hang the unit onto the two screws. Installing the unit to the TV (Except for China model) You can install this unit to the TV using the optional speaker attachment bracket. For details on the compatible TV model and the speaker attachment bracket, refer to the supplied "Compatible list". 12GB Listening to TV sound from the speaker of the unit Listening to TV sound 1 2 Control the volume of the unit by adjusting the TV volume If the sound output jack of the TV can be set to "Variable", the volume of the unit can be changed by adjusting the TV volume. For TV settings, refer to the operating instructions of the TV. Turn on the unit or make sure the unit is in standby mode. Turn on the TV. While the unit is in the standby mode, the unit turns on automatically when a sound of a TV is detected. 1 2 3 Adjust the volume of the unit. Set the sound output jack of the TV to "Variable". [. . . ] · Check that the audio cord of the unit and the TV is fully inserted (page 10). · Check that headphones are not connected to the TV. REMOTE CONTROL The remote control does not function. · Point the remote control at the remote control sensor on the unit (page 7). · Remove any obstacles in the path between the remote control and the unit. [. . . ]