User manual SONY RDP-X60IP

[. . . ] Do not leave the unit in a location near a heat source such as a radiator or airduct, or in a place subject to direct sunlight, excessive dust, mechanical vibration, or shock. Do not place the unit on a surface (a rug, a blanket, etc. ) or near materials (a curtain) which might block the ventilation holes. Should any solid object or liquid fall into the unit, unplug the unit and have it checked by qualified personnel before operating it any further. Do not place the unit anywhere near water. On Bluetooth communication Bluetooth wireless technology operates within a range of about 10 meters. [. . . ] Please note that the use of this accessory with iPod or iPhone may affect wireless performance. Use of this radio equipment is not allowed in the geographical area within a radius 20km from the centre of Ny-Alesund, Svalbard in Norway. When to replace the battery With normal use, the battery (CR2025) should last for about 6 months. When the remote commander no longer operates the unit, replace the battery with a new one. Note In the Operating Instructions, "iPod" is used as a general reference to functions on an iPod, iPhone or iPad, unless otherwise specified by the text or illustrations. If you have any questions or problems concerning your unit, please consult your nearest Sony dealer. the side facing up Features Wireless Music Streaming Compatible with iPod and iPhone MEGA BASS Wireless remote commander supplied Notes Do not attempt to charge the battery. If you are not going to use the remote commander for a long time, remove the battery to avoid any damage that may be caused by leakage and corrosion. Operations *1 During playback, this operation returns to the beginning of the current track. 2 * These operations are available only when using the supplied remote commander. In addition, for iPod touch and iPhone, operation video or music mode is required for these operations to be available. MEGA BASS indicator Bluetooth indicator Notes 4 Play the connected component. 5 Select "RDP-X60iP" on the display of the iPod while the Bluetooth indicator flashes quickly. When "Connected" appears on the display of the iPod, pairing and connection are complete. Example: iPhone 4 AUDIO IN DC IN 20V The sound from the connected component is output from the speakers of this unit. Specifications Section for iPod DC out: 5V MAX: 1A Section for Bluetooth Output Bluetooth Specification Power Class 2 Maximum communication range Line of sight approx. 10 m*1 Frequency band 2. 4 GHz band (2. 4000 GHz ­ 2. 4835 GHz) Communication System Bluetooth Specification Version 2. 1 + EDR (Enhanced Data Rate) Compatible Bluetooth Profiles*2 A2DP (Advanced Audio Distribution Profile) AVRCP*3 (Audio Video Remote Control Profile) Supported codec*4 SBC*5 *1 The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, reception sensitivity, aerial's performance, operating system, software application, etc. models. Remote sensor When placing or removing the iPod, hold the iPod at the same angle as that of the connector on this unit, and do not twist or bend the iPod as it may result in connector damage. If the battery of your iPod is extremely low, charge it for a while before operation. Be sure to turn on the power of the iPod touch/iPhone before operation. Some operations may differ depending on the iPod models and/or software version. For details, refer to the user's guide of your iPod. To external equipment Notes To use this unit as a battery charger for your iPod You can use the unit as a battery charger for your iPod. 1. 8 kg Supplied accessories Remote commander (1) AC power adaptor (1) AC power cord (1) Universal Dock Adapter for iPhone (1) Universal Dock Adapter for iPhone 3G/iPhone 3GS (1) Universal Dock Adapter for iPhone 4 (1) Design and specifications are subject to change without notice. Keep the iPod and the unit within 10 meters of each other for this operation. Check the following before operating the unit. 1 Press to turn on the unit. 2 Press to turn on the Bluetooth. On pairing What is pairing? The Bluetooth of your iPod is on. Pairing of the unit and your iPod is complete, if pairing is not completed, perform pairing again. (Refer to "To pair with an iPod") Make sure the AC power cord is connected to the wall outlet firmly. Adjust VOLUME +/- (VOL +/- on the remote commander). There is no audio. Bluetooth devices need to be "paired" with each other beforehand. Once Bluetooth devices are paired, there is no need for pairing again, unless pairing information is deleted. [. . . ] Check that the Bluetooth connection is made properly between this unit and the iPod. Otherwise, press to turn on Bluetooth. Sound skips or the correspondence distance is short. Supplied Universal Dock Adapter A list of detected devices appears on the display. The unit is displayed as "RDP-X60iP. " If "RDP-X60iP" is not displayed, repeat from step 3. If a device that generates electromagnetic radiation, such as a wireless LAN, other Bluetooth device(s), or a microwave oven is nearby, move away from such sources. Remove any obstacle between this unit and iPod or move away from the obstacle. [. . . ]