User manual SONY MHC-RX80

[. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ­ Reorient or relocate the receiving antenna. [. . . ] With the side you want to play/record facing forward You can check the remaining time of the current track or the entire CD. When a CD TEXT disc is loaded, you can check the information stored on the disc, such as the disc titles or artist names. When the unit detects CD TEXT discs, the "CD-TEXT" indication appears in the display. Each time you press the button during normal playback or in the stop mode, the display changes as follows: T Playing time of the current track x Remaining time of the current track x Remaining time of current CD (1 DISC mode) or "--. During Program Play mode when there is a program t The last track number of the program and the total playing time x Total number of programmed tracks (for eight seconds) x Title name and the artist name of the CD* x Clock display (for eight seconds) x Effect status In other conditions t Total number of tracks and total playing time x Title name and the artist name of the CD* x Clock display (for eight seconds) x Effect status * With CD TEXT discs only (certain characters cannot be displayed). This function lets you repeat a single CD or all CDs in Normal Play, Shuffle Play, and Program Play. Press REPEAT repeatedly until "REPEAT" or "REPEAT 1" disappears from the display. If you press PLAY MODE until "SHUFFLE ALL DISCS" appears, "REPEAT" is canceled automatically. ⷠDuring Program Play, the program is also repeated up to five times. , Press REPEAT during playback until "REPEAT" appears in the display. To repeat All the tracks on the current CD up to five times All the tracks on all CDs up to five times Only one track Press PLAY MODE repeatedly until "CONTINUE 1 DISC" or "SHUFFLE 1 DISC" appears in the display. Every time you press the button, the display changes as follows: SURROUND ON (SURROUND) Y SURROUND OFF (off) When you choose other sound effect, the surround effect will be canceled. (When using the remote, press ON/ OFF to activate the equalizer effect and press MENU +/­ repeatedly until "USER FILE" appears in the display. RDS may not work properly if the station you are tuned to is not transmitting the RDS signal properly or if the signal strength is weak. * Not all FM stations provide RDS service, nor do they provide the same types of services. If you are not familiar with the RDS system, check with your local radio stations for details on RDS services in your area. Each time you press DISPLAY, the display changes as follows: t Station name* x Frequency x Program type* x Clock display x Effect status * If the RDS broadcast is not received, the station name and program type may not appear in the display. The unit tunes in the type of programs currently being broadcast from the RDS stations stored in the tuner's preset memory. CULTURE Programs about national or regional culture, language, and social concerns. PHONE IN Programs where members of the public express their views by phone or in a public forum. The unit starts searching the preset RDS stations ("SEARCH" and the selected program type are shown alternately in the display). Turn the shuttle until it clicks to display the preset station number you desire. [. . . ] If you run into any problem using this stereo system, use the following check list. First, check that the power cord is connected firmly and the speakers are connected correctly and firmly. Do not change the tape operations such as play, stop, and fast-winding (etc. The display starts flashing as soon as you plug in the power cord even though you haven't turned on the power (demonstration mode). [. . . ]