User manual SONY MHC-EC99I

[. . . ] 4-131-119-12(1) Mini HI-FI Component System GB Notice for customers: the following information is only applicable to equipment sold in countries applying EU directives MHC-EC99i MHC-EC79i (Australian and UK models only) Getting Started MHC-EC69i only Antennas To use the iPod Find a location and an orientation that provide good reception, and then set up the antenna. Keep the antennas away from the speaker cords and the power cord to avoid picking up noise. Press PUSH on the unit to flip-open the iPod Dock, slide the LOCK lever to the HOLD position, and insert an iPod Dock Adapter into the Dock before use. For details on the iPod Dock Adapters, refer to the instructions supplied with the Dock Adapters. iPod Dock Adapter To remove the iPod Dock Adapter, pull it up with your fingernail or a flat object using the slot inside the adapter. Operating Instructions The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku, Tokyo, 108-0075 Japan. [. . . ] Use buttons on the remote to use the timer functions. Troubleshooting 1 Make sure the power cord and speaker cords are correctly and firmly connected. iPod The remote does not function. Update your iPod with the latest software before using with this system. 5 Repeat steps 3 through 4 to program additional tracks or files, up to a total of 25 tracks or files. 6 To play your program of tracks or files, press . The program remains available until you open the disc tray or CD compartment (MHC-EC69i only). To play the same program again, select the CD function, and then press . 2 Place the iPod. Sleep Timer: 2 Find your problem in the checklist below, and take There is no sound. To cancel Program Play Press PLAY MODE repeatedly until "PGM" disappears while the player is stopped. You can fall asleep to music. If you select "AUTO, " the system automatically turns off after the current disc stops or in 100 minutes. the indicated corrective action. If the issue persists, contact your nearest Sony dealer. If "PROTECT" appears on the display Make sure the iPod is connected securely. Adjust the volume. Play Timer: To delete the last track or file of the program Press CLEAR while the player is stopped. You can wake up to CD, tuner or iPod at a preset time. Make sure you have set the clock. 3 Start playback. Press (or on the unit) . To view program information, such as total track number of the program Press DISPLAY repeatedly. 1 Prepare the sound source. Prepare the sound source, and then press VOLUME +/ to adjust the volume. To start from a specific CD track or audio file, create your own program. Immediately unplug the power cord, and check the following items after "PROTECT" disappears. Is anything blocking the ventilation holes on the back of the system?After you have checked these above items and found to be all right, reconnect the power cord, and turn on the system. If the issue persists, contact your nearest Sony dealer. The sound is distorted. Turn down the volume. Set the "EQ" setting of the iPod to "Off " or "Flat. " PUSH SELECT : You tried to set the clock or timer during timer operation. SET TIMER : You tried to select the timer when the Play Timer is not set. TIME NG : The Play Timer start and end times are set to the same time. On placement iPodsection Display examples Display indicates 2 (two) The iPod cannot be charged. Do not place the system in an inclined position or in locations that are extremely hot, cold, dusty, dirty, or humid or lacking adequate ventilation, or subject to vibration, direct sunlight or a bright light. Be careful when placing the unit or speakers on surfaces that have been specially treated (for example, with wax, oil, polish) as staining or discoloration of the surface may result. If the system is brought directly from a cold to a warm location or is placed in a very damp room, moisture may condense on the lens inside the CD player, and cause the system to malfunction. In this situation, remove the disc, and leave the system turned on for about an hour until the moisture evaporates. Compatible iPod models: iPod touch 2nd generation iPod nano 4th generation (video) iPod touch 1st generation Make sure the iPod is connected securely. The iPod is charged only when the system is on. On heat buildup 5 (five) 6 (six) 8 (eight) 0 (zero) A B D G H K M O Q R S Z | " $ % , . @ ^ "OVER CURRENT" appears. To control the iPod You can control your iPod with the following buttons on the remote or unit. To Pause playback Press (pause) (or (play/pause) on the unit) or (stop) . You can scroll up or down the iPod menus much like the Click Wheel operations of the iPod or the drag up-or-down operations of the iPod touch. To fast-forward or fast-rewind, hold down the button. Using optional audio components (except for MHC-EC69i) 1 Prepare the sound source. Connect additional audio component to the PC IN jack on the unit using an audio analog cord (not supplied). 2 Select the timer set mode. Press TIMER MENU . General The system does not turn on. Is the power cord plugged in? 3 Set the play timer. Press / repeatedly to select "PLAY SET, " and . then press "ON TIME" appears, and the hour indication flashes. A problem has been detected with the level of electrical current from the iPod connector. If this display pattern persists, contact your nearest Sony dealer. Heat buildup on the unit during operation is normal and is not cause for alarm. [. . . ] 2 Press on the unit to turn off the system and confirm that "STANDBY" stops flashing. The disc tray does not open and "LOCKED" appears. The system offers the following display modes. Display mode Power Saving Mode1) When the system is off, The display is turned off to conserve power. The clock is displayed. Contact your Sony dealer or local authorized Sony service facility. (MHC-EC99i and MHC-EC79i (Australian and UK models only)) 3 Unplug the power cord. Creating your own program (Program Play) Use buttons on the remote to create your own program. Tuner Severe hum or noise, or stations cannot be received. ("TUNED" or "ST" flashes on the display. ) Clock2) 1) Messages CANNOT LOCK : The system cannot be locked after you have done the procedure of "When carrying this system. " COMPLETE : The preset operation ended normally. [. . . ]