User manual SONY MHC-EC98P

[. . . ] Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product. MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson. Press SUBWOOFER ON/OFF on the unit until "SUBWOOFER" appears. The volume of the subwoofer is linked to the front speakers. Connect the DIGITAL MEDIA PORT adaptor to the DMPORT on the unit. You need to connect the DIGITAL MEDIA PORT adaptor to an optional audio device (portable audio player, etc. ). Notes on DIGITAL MEDIA PORT adaptor Available DIGITAL MEDIA PORT adaptors vary in each area. [. . . ] ID3 tag information for MP3 files when ID3 version 1 and version 2 tags are used (ID3 version 2 tag information display has priority when both ID3 version 1 and version 2 tags are used for a single MP3 file). up to 15 characters of ID3 tag information using uppercase letters (A to Z), numbers (0 to 9), and symbols (`< > * + , ­ / @ [ \ ] _). Attach the supplied speaker pads to the bottom of the front speakers and subwoofer to prevent slipping. To set the clock * When playing a CD-DA disc, (SHUF) Play performs the same operation as 1 DISC (SHUF) Play. All tracks or files on a disc are played repeatedly up to five times. You cannot select "REP" and "SHUF" (all discs shuffle) at the same time. "REP1" indicates that a single track or file is repeated until you stop it. 1 Turn on the system. Press (on/standby) to turn on the system. 2 Select the clock set mode. Speakers Subwoofer (MHC-EC98P only) Insert only the stripped portion of the cord. Front speakers: 4 pads for each speaker Subwoofer: 4 pads (MHC-EC98P only) Press TIMER MENU . If "PLAY SET" flashes, press / repeatedly to select "CLOCK, " and then press (enter) . Notes on playing MP3 discs 3 Set the time. Press / repeatedly to set the hour, then press (enter) . while the player is stopped. 2 Press PLAY MODE repeatedly until "PGM" appears 3 Press DISC SKIP to select a disc. If you select "AUTO, " the system automatically turns off after the current disc stops or in 100 minutes. the indicated corrective action. If the issue persists, contact your nearest Sony dealer. If "PROTECT" appears on the display 2 Press DISPLAY to display the clock. 3 While holding down TUNING + , press . All the AM preset stations are erased. To reset the interval to the factory preset, repeat the procedure. Discs that this system CANNOT play Play Timer: You can wake up to CD or tuner at a preset time. Make sure you have set the clock. repeatedly until the desired track number appears. When programming MP3 files, press +/ repeatedly to select the desired folder, and then select the desired file. Selected track or file number 1 Prepare the sound source. Press VOLUME +/ (or turn VOLUME on the unit) to adjust the volume. To start from a specific CD track or MP3 file, create your own CD program. Immediately unplug the power cord, and check the following items after "PROTECT" disappears. Is anything blocking the ventilation holes on the top or back of the system?After you have checked these above items and found to be all right, reconnect the power cord, and turn on the system. If the issue persists, contact your nearest Sony dealer. To improve tuner reception Turn off CD player power by using the CD power management function. By default, CD power is turned on. 1 Press FUNCTION +/ (or FUNCTION on the unit) repeatedly to select the CD function. 2 Press TIMER MENU . 3 Press / repeatedly to select "PLAY SET, " then Total playing time of the selected track General The system does not turn on. Is the power cord plugged in? 2 Press to turn off the system. press "ON TIME" appears, and the hour indication flashes. 5 Press to add the track or file to the program. 6 Repeat steps 3 through 5 to program additional tracks or files, up to a total of 25 tracks or files. 4 Set the time to start playback. [. . . ] 200 × 306 × 415 mm On the speaker system 6 To call up a preset radio station, press TUNING MODE repeatedly until "PRESET" appears, and then press +/ (or TUNING +/ on the unit) repeatedly to select the desired preset number. Tuner Severe hum or noise, or stations cannot be received. ("TUNED" or "ST" flashes on the display. ) Connect the antenna properly. Find a location and an orientation that provide good reception, and then set up the antenna again. Keep the antennas away from the speaker cords and the power cord to avoid picking up noise. [. . . ]