User manual SONY MEX-DV800

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. [. . . ] Tip You can select a track to play using a list (QuickBrowZer) (page 31). With the main unit Press (SOURCE) instead of (SRC), press (SETUP) instead of (SYSTEM SETUP), rotate the control dial instead of pressing M/m, press the control dial instead of (ENTER). While receiving the station that you want to store, press and hold a number button ((1) to (6)) until "MEM" appears on the main unit. Note If you try to store another station on the same number button, the previously stored station will be replaced. This unit automatically provides RDS services as follows: AF (Alternative Frequencies) Selects and retunes the station with the strongest signal in a network. By using this function, you can continuously listen to the same program during a long-distance drive without having to retune the same station manually. tA (Traffic Announcement)/TP (Traffic Program) Provides current traffic information/programs. Any information/program received, will interrupt the currently selected source. Depending on the country/region, not all RDS functions may be available. RDS will not work if the signal strength is too weak, or if the station you are tuned to is not transmitting RDS data. FM stations with Radio Data System (RDS) service send inaudible digital information along with the regular radio program signal. If you use the BTM function, only RDS stations are stored with the same AF/TA setting. If you preset manually, you can preset both RDS and non-RDS stations with the AF/TA setting for each. With AF or TA on, the emergency announcements will automatically interrupt the currently selected source. Tip If you adjust the volume level during a traffic announcement, that level will be stored into memory for subsequent traffic announcements, independently from the regular volume level. When the AF function is on: this unit's factory setting restricts reception to a specific region, so you will not be switched to another regional station with a stronger frequency. If you leave this regional program's reception area, set "REG-OFF" in system setup during FM reception (page 42). Note You cannot use this function in countries/regions where no PTY data is available. This function enables you to select other local stations in the area, even if they are not stored on your number buttons. 1 During FM reception, press a number button ((1) to (6)) on which a local station is stored. The CT function may not work even though an RDS station is being received. There might be a difference between the time set by the CT function and the actual time. [. . . ] If these solutions do not help improve the situation, consult your nearest Sony dealer. If you take the unit to be repaired because of disc playback trouble, bring the disc that was used at the time the problem began. Videos encoded with DivX technology are among the highest quality with a relatively small file size. The rear channel is stereo and there is a discrete subwoofer channel in this format. [. . . ]