User manual SONY MEX-DV1500U

[. . . ] For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. Applicable accessory: Remote commander CAUTION The use of optical instruments with this product will increase eye hazard. As the laser beam used in this CD/DVD player is harmful to eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only. This label is located on the bottom of the chassis. Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems) This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. [. . . ] C 2-channel area An area in which 2-channel stereo tracks are recorded. D Multi-channel area* An area in which multi-channel (up to 5. 1 channels) tracks are recorded. * Cannot play this area on this unit. 2 3 If the disc contains different content on its layers, you can select a layer (to compare sound quality, for example). Press M/m to select "2CH" or "CD, " then press (ENTER). continue to next page t 33 To hide the system setup display, press (SYSTEM SETUP). Note For Super Audio CDs consisting of only a Super Audio CD layer, that layer is played regardless of setting. Tip The setting in visual setup will switch the setting in system setup automatically, and vice versa. Advanced Operations -- Radio Storing and receiving stations Number buttons Selecting the sound quality This unit allows you to change the sound quality of Super Audio CD playback by switching the sampling frequency. The setting is configurable both from the visual setup menu (page 38) and the system setup menu (page 42). The options for "SUPER AUDIO CD MODE" (visual setup) and "SA-CD MOD" (system setup) are indicated below. STD: Outputs at 44. 1 kHz (standard CD sound quality). SYSTEM SETUP M/m ZXZ PL ENTER SRC MODE Caution When tuning in stations while driving, use Best Tuning Memory (BTM) to prevent an accident. Storing automatically -- BTM 1 By the visual setup menu The setting procedure is the same as for setting the playback layer (page 33). Press (VISUAL SETUP), then select "AUDIO SETUP" c "SUPER AUDIO CD MODE" c "HQ" or "STD. " Press (SRC) repeatedly until "TUNER" appears on the main unit. The unit stores stations in order of frequency on the number buttons ((1) to (6)). A beep sounds when the setting is stored. 2 3 By the system setup menu The setting procedure is the same as for setting the playback layer (page 33). Press (SYSTEM SETUP), then select "SA-CD MOD" c "HQ" or "STD. " Note When set to "HQ, " EQ7 (page 37) and HPF (page 44) settings are deactivated. EQ7: Selects an equalizer curve from 7 music types. "CUSTOM" of EQ7 allows you to make your own equalizer settings. You can adjust the level of 7 different bands: 62 Hz, 157 Hz, 396 Hz, 1 kHz, 2. 5 kHz, 6. 3 kHz, and 16 kHz. 1 During playback/reception, press (SYSTEM SETUP). The level is adjustable in single steps, between ­8 and +8. 2 3 4 1 During playback/reception, press (SOUND) repeatedly until the desired setting item appears on the main unit. 2 Press </, to adjust the level or select the desired option. After 3 seconds, the setting is complete and the display returns to normal play/reception mode. To switch the frequency, press </, . To restore the factory-set equalizer curve, press and hold (ENTER). With the main unit Press the volume control dial instead of (SOUND), rotate the volume control dial instead of pressing </ , . 5 Press (ENTER). The setting is complete and the display returns to normal play/reception mode. Note EQ7 is not selectable in karaoke mode, or when "SUPER AUDIO CD MODE" in visual setup (page 41)/ "SA-CD MOD" in system setup (page 44) is set to "HQ. " Tip Other equalizer types are also adjustable. With the main unit Rotate the volume control dial instead of pressing M/ m, press the volume control dial instead of </, or (ENTER). 37 Settings Various settings are configurable from the following two setup menus. · Visual setup menu (page 38) Allows configuration of visual-related items (by the monitor). · System setup menu (page 42) Allows configuration of system-related items (by the main unit). E. g. , when setting the aspect ratio to "4:3 PAN SCAN. " 1 Press (VISUAL SETUP) while the unit is off. The visual setup menu appears. LANGUAGE SETUP MENU : AUDIO : SUBTITLE : ENGLISH ENGLISH ENGLISH Visual setup The visual setup menu includes the following categories. DISPLAY SETUP (page 39) Adjusts the settings of the connected monitor. [. . . ] DVD A disc that contains up to 8 hours of moving pictures even though its diameter is the same as a CD. The data capacity of a single-layer and single-sided DVD is 4. 7 GB (Giga Byte), which is 7 times that of a CD. The data capacity of a double-layer and single-sided DVD is 8. 5 GB, a single-layer and double-sided DVD is 9. 4 GB, and double-layer and double-sided DVD is 17 GB. The picture data uses the MPEG 2 format, one of the worldwide standards of digital compression technology. [. . . ]