User manual SONY MEX-BT3700U annexe 2

[. . . ] Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems) This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. By ensuring these batteries are disposed of correctly, you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery. the recycling of the materials will help to conserve natural resources. In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. [. . . ] Be sure that both this unit and the audio device are switched to Bluetooth signal on. To use the Bluetooth function, switch the Bluetooth signal output of this unit to on. 1 Be sure that both this unit and the audio device are switched to Bluetooth signal on. Be sure that both this unit and the cellular phone are switched to Bluetooth signal on. Connecting the last-connected cellular phone from this unit 1 Be sure that both this unit and the cellular phone are switched to Bluetooth signal on. Note While streaming Bluetooth audio, you cannot connect from this unit to the cellular phone. Tip With Bluetooth signal on: when the ignition is switched to on, this unit reconnects automatically to the lastconnected cellular phone. but automatic connection also depends on the cellular phone's specification. You can switch between two volume levels ("LOW" or "HI") to set a suitable level for the other party during a call. Note The microphone of this unit is located on the rear of the front panel (page 8). Press To call another phone, use your cellular phone, and then transfer the call. ⷠIf you activate voice dialing with a cellular phone connected to this unit, this function may not always work in some cases. ⷠNoises such as the engine running may interfere with sound recognition. In order to improve recognition, operate under conditions where noise is minimized. ⷠVoice dialing may not work in some situations, depending on the effectiveness of the cellular phone's recognition function. ⷠStore a voice tag while seated in the car, via this unit with "BT PHONE" source selected. Listening to music from an audio device You can listen to music of an audio device on this unit if the audio device supports A2DP (Advanced Audio Distribution Profile) of Bluetooth technology. For details on cellular phone operation, refer to your cellular phone manual. Note Depending on the cellular phone, handsfree connection may be cut off when call transfer is attempted. You can activate voice dialing with a cellular phone connected to this unit by saying the voice tag stored on the cellular phone, then make a call. The volume level is adjustable for any difference between the unit and the Bluetooth audio device. 3 Press the select button repeatedly until "BTA" appears, and rotate the volume control dial to adjust the input level (­8 dB to +18 dB). [. . . ] The connection is controlled from one side (this unit or Bluetooth device), but not both. If the ambient noise other than the phone call sound is loud, try reducing this noise. When the Bluetooth audio is played back, the phone is not connected even if you press (handsfree). Phone sound quality depends on reception conditions of cellular phone. [. . . ]