User manual SONY IPELA SNC-RZ50N

[. . . ] 3-990-921-11 (1) Network Camera User's Guide Software Version 1. 0 SNC-RZ50N/RZ50P © 2005 Sony Corporation Owner's Record The model and serial numbers are located on the bottom. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. [. . . ] With this item, you can select whether you restart or stop the tour after it has stopped by manual pan, tilt or zoom operation or by camera movement to the preset position triggered by an alarm. On: Specify the wait time before the tour restarts, between 5 and 600 seconds. Off: The tour does not restart. Note The tour cannot be set to On if no preset position is added in the Sequence list. OK/Cancel See "Buttons common to every menu" on page 30. Tour A to Tour E Configure Tour A to Tour E respectively. Each tour setting consists of 5 items: On/Off, Effective period, Stay time, Speed and Sequence. Effective period Select the period during which the tour in activated. Schedule: The tour is activated according to the schedule you have set. ("Setting the Schedule -- Schedule Menu" on page 63. ) Note Administrating the Camera You cannot set tours if the effective periods overlap each other. Stay time Type a period of time during which the camera is to stay at each preset position, between 1 and 3600 seconds. Speed Select the speed of camera movement between 1 and 23, or Fastest from the drop-down list. The preset positions saved using the Position tab are displayed in the drop-down list at the bottom. If you specified an unnecessary preset position, click to select it in the list and click then Delete. To change the order in the list, click to select the preset position and then click Up or Down. Saving the Camera Position and Action -- Preset position Menu 49 Sending an Image via Email -- e-Mail (SMTP) Menu When you click SMTP in the Administrator menu, the e-Mail (SMTP) menu appears. Using e-Mail (SMTP) function, you can send an e-mail with attached image file that has been shot linked with an external sensor input or with the built-in object detection function. The e-Mail (SMTP) menu consists of three tabs: Common, Alarm sending and Periodical sending. from the following and specify the POP server name, User name and Password as required. POP before SMTP: Select when POP before SMTP authentication is required. Note When you set Authentication to On, be sure to select either or both SMTP or/and POP before SMTP. POP server name It is necessary when POP before SMTP is selected for Authentication. Type the POP (receiving mail) server name using up to 64 characters, or type the IP address of the POP server. This setting is necessary when the SMTP server that sends e-mails performs authentication using the POP user account. User name, Password Type the user name and password of the user who owns the mail account using up to 64 characters. This setting is necessary when the SMTP server that sends e-mails performs authentication. Common Tab -- Setting the e-Mail (SMTP) Function Administrating the Camera Recipient e-mail address Type the recipient e-mail address using up to 64 characters. You can specify up to three recipient e-mail addresses. Administrator e-mail address e-Mail (SMTP) Select On when you use the e-Mail (SMTP) function. Notes Type the Administrator e-mail address using up to 64 characters. This address is used for reply e-mails and sending system messages from the mail server. · You cannot send an audio file by using the e-mail sending function. [. . . ] 52, 54 periodical sending. . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 playing audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 POP server . . . . . . . . . . . . . . . . . . . . . . . . . . 44, 50, 56 port number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Position. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47, 67 Position at alarm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Post alarm period. . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Pre alarm period . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Preset call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Preset position . . . . . . . . . . . . . . . . . . . . . . . . . . 18, 23 Preset position Menu . . . . . . . . . . . . . . . . . . . . . . 47 preset position name. . . . . . . . . . . . . . . . . . . . . . . 48 Preset position table. . . . . . . . . . . . . . . . . . . . . . . . 48 Primary DNS server . . . . . . . . . . . . . . . . . 42, 43 Proxy port number. . . . . . . . . . . . . . . . . . . . . . . . . . 45 proxy server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Proxy server name . . . . . . . . . . . . . . . . . . . . . . . . . . 45 PTZ mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 PTZ position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 M MAC address . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]