User manual SONY ECM-HW2

[. . . ] 3 hours (With a Sony alkaline dry battery at 25 ºC (77 ºF)) When used at low temperature, the operating time with an alkaline dry battery will shorten. 26 g (1 oz) (excluding the battery) Receiver/microphone (transmitter) Operating temperature 5 ºC to 40 ºC (41 ºF to 104 ºF) Storage temperature ­20 ºC to +60 ºC (­4 ºF to +140 ºF) Included items Receiver (ECM-HW2(R)) (1), Microphone (transmitter) (ECM-HW2(T)) (1), Wind screen (1), Carrying pouch (1), Arm band (1), Earphone (2), Earphone hanger (1), Set of printed documentation Design and specifications are subject to change without notice. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] 3 Insert the shoe connector (terminal) of the receiver into the slot on the video camera, and then slide the receiver in the direction of the arrow while pressing the lock knob (see illustration -1). point the front (receiving unit) of the receiver toward the video camera's lens side (see illustration -3). 2 Hold the lock knob and slide the receiver in the opposite direction when attaching. Notes When turning the lock knob, be careful not to turn the main body of the receiver. If it is difficult to attach the receiver, turn the lock knob counterclockwise until it stops. ) If the front (receiving unit) of the receiver does not face the microphone (usually the video camera's lens side, which faces the subject), reception will be poor. This Wireless Microphone is designed to be used with a compatible video camera equipped with an Active Interface Shoe. This wireless microphone can pick up the sound of a subject at a distance from the video camera clearly. 1ch recording, this wireless microphone will provide center channel sound, delivering clear, natural sound. this wireless microphone is based on Bluetooth wireless communication technology. A microphone unit and earphones are provided for each receiver installed on the video camera and the microphone for the subject (transmitter, referred to below as "microphone"). The person recording the scene with the video camera and the subject can communicate when apart, and that sound can be recorded. Use a size AAA alkaline dry battery or size AAA Ni-MH rechargeable battery. This device may not give the best performance with batteries of other manufacturers. 2 Insert a battery into the compartment correctly following the polarity indication inside. Inserting the battery with the pole in the wrong direction may cause leakage or ruptures. Bluetooth wireless communication technology allows communication between various Bluetooth devices without using cables. Devices that can use this technology include PCs, computer peripheral devices and mobile phones. The receiver and the microphone are factory-set to communicate between each other, therefore, operations usually needed for Bluetooth devices, such as authentication, pairing and passkey input, are not necessary. However, communication with a receiver or microphone not sold as a pair, or any other Bluetooth devices such as mobile phones, PCs, etc. Attach the microphone in a position that is suitable for the recording location, and which provides the best sound while monitoring through the earphone attached to the receiver (as described later). Notes If you use a medical electrical device such as a pacemaker, do not attach the microphone to your clothes, such as the breast pocket or inner pocket. [. . . ] (Although the video camera also picks up and records sound with its internal microphone or the microphone (sound pickup unit) on the receiver in 5. 1ch MIX mode and MONO MIX mode, those sounds cannot be monitored via the receiver's earphone jack. Only the sound the microphone (transmitter) is picking up can be monitored. ) The volume of the earphone can be adjusted with and of the volume adjustment button. [. . . ]