User manual SONY CYBER-SHOT DSC-J10

[. . . ] If you have any questions about this product, you may call: Sony Customer Information Center 1-800-222-SONY (7669). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] For details on advanced operations, please read "Cyber-shot User Guide" (HTML) on the CD-ROM (supplied) using a computer. For Macintosh users: 1 Select the [User Guide] and copy [eng] folder stored in the [User Guide] folder to your computer. Otherwise, you cannot firmly secure the camera, and damage to the camera may occur. R RESET button S Lock release lever for USB arm T (USB) arm U USB arm cover The battery pack is built into the camera. USB arm The USA and Canada Lock release lever for USB arm Dedicated USB connection support cable (supplied) The lock release lever for 2 SlideUSB arm cover opens as shown in USB arm. ⷠIf the USB arm cover is closed, open the USB arm cover and lay the USB arm. ⷠUse a nearby wall outlet (wall socket) when using the supplied AC Adaptor. Disconnect the AC Adaptor from the wall outlet (wall socket) immediately if any malfunction occurs while using the camera. ⷠWhen charging is finished, disconnect the dedicated USB connection support cable (supplied) from the computer, or the AC Adaptor from the wall outlet (wall socket). ⷠMake sure to use the supplied AC adaptor or the supplied dedicated USB connection support cable for charging. ⷠIf the Power/Charge lamp does not light up even after connecting the AC adaptor to the camera and the wall outlet (wall socket), the battery pack is in charging standby condition as the ambient temperature is out of the appropriate range. Charging starts and the lamp lights up when the ambient temperature becomes appropriate for charging. You can charge the battery pack with the dedicated USB connection support cable. 2 Connect the camera to the computer that is turned on with the dedicated USB connection support cable (supplied). The Power/Charge lamp may turn off when the temperature is outside of the recommended operating temperature (10°C to 30°C (50°F to 86°F)). 3 When charging is finished, delete the USB connection between the camera and computer. note · Be careful also of the following points: ­ When you connect the camera to a laptop computer that is not connected to an AC power source, the battery of the laptop computer may be depleted rapidly. ­ Do not perform start-up, restart, resuming from sleep mode, or shut-down operations on your computer while the camera is connected. Disconnect the camera from the computer before performing these operations. ­ Charging the battery with customized or hand-built computers is not guaranteed. [. . . ] Before changing ownership of the camera, or before disposal, delete any personal information. ⷠEven if you delete data in the internal memory or format the camera, you may not delete data from the internal memory completely. ⷠTo prevent data on the internal memory from being recovered, write unintelligible data onto the internal memory of the camera. When measuring media capacity, 1GB equals 1billion bytes, a portion of which is used for system management and/or application files. [. . . ]