User manual SONY DPP-FP85

[. . . ] 3-285-420-12 (1) Before you begin Digital Photo Printer DPP-FP85/FP95 Preparations Direct printing Printing from a PictBridge digital camera Printing from a Bluetoothcompliant device Printing from a PC Error messages Operating Instructions Before operating this unit, please read "Read This First" and "About the Print Pack" supplied and this manual, "Operating Instructions, " thoroughly and retain them for future reference. Troubleshooting Owner's Record The model and serial numbers are located on the bottom of the printer. Refer to these numbers whenever you call upon your Sony dealer regarding this product. ________________________ Additional information © 2008 Sony Corporation Please read the supplied "Read This First" and "About the Print Packs. " WARNING To reduce fire or shock hazard, do not expose the unit to rain or moisture. For the customers purchasing the DPP-FP95 in the U. S. A. CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. If you have any questions about this product, you may call: Sony Customer Information Services Center 1-800-222-SONY (7669) The number below is for the FCC related matters only. user is encouraged to try to correct the interference by one or more of the following measures: ­ Reorient or relocate the receiving antenna. [. . . ] · While the access indicator of the external device is flashing, never turn off the power of the printer or an external device nor remove the external device. We cannot compensate for any damages that may be caused by data loss or damage. · You cannot use a USB hub or a USB device equipped with a USB hub. · Encoded or compressed data by fingerprint authentication or password cannot be used. 1 Set your digital camera or other external device ready for printing with the Mass Storage-compliant printer. The settings and operations that are necessary before connection differ depending on the external device you use. (In case of Sony Cyber-shot digital camera, for example, select "Normal" mode or "Mass Storage" mode for the "USB Connect. " ) 2 3 4 Connect the printer to the AC power source (page 12). Connect an external device such as a USB memory to the PictBridge/ EXT INTERFACE connector of the printer. Use a USB cable supplied with your digital camera or external device. You can enjoy direct printing. 46 GB Printing from a PictBridge digital camera Printing from a PictBridge digital camera You can connect a PictBridge-compliant digital camera and print an image directly from your digital camera. When printing from a PictBridge/EXT INTERFACE connector, make sure to remove memory card(s), your computer, and a television from the printer in advance. · · · · Index Print DPOF Print Borders/Borderless Print Date Print To PictBridge/EXT INTERFACE connector 1 Set your digital camera ready for printing with a PictBridge-compliant printer. The required settings and operations that must be completed before connection differ depending on the digital camera. (In case of a Sony Cyber-shot digital camera, for example, select "PictBridge" mode for the "USB Connect. ") Camera or other PictBridge-complaint device Printing from a PictBridge digital camera To USB connector Notes · If you replace an ink ribbon while the printer is connected to a PictBridge-compliant digital camera, an image may not be printed properly. · When printing from a PictBridge-compliant digital camera, an image will be printed according to the settings of the Print setup menu of the printer. When you set the Date Print or Borders/Borderless options with your digital camera, the digital camera settings will have priority. If you select "Borders" with the printer and "Borders" with your camera, "Pattern 1" will be used for printing. · Even when you select "Date/Time" for Date Print setting, time may not be printed according to the digital camera you use. · For error messages displayed on your digital camera, refer to the operating instructions of your digital camera. · You cannot use a USB hub or a digital camera containing a USB hub. 2 3 4 Connect the printer to the AC power source (page 12). Connect the PictBridge-compliant digital camera to the PictBridge/EXT INTERFACE connector of the printer. When you connect a PictBridge-compliant digital camera to the printer, "PictBridge" is displayed on the LCD display of the printer. 5 Operate the digital camera to print an image. The printer supports the following prints: · Single-image print · All images print 47 GB Printing from a Bluetooth-compliant device Printing from a Bluetoothcompliant device By connecting the Sony DPPA-BT1 Bluetooth USB adaptor to the PictBridge/EXT INTERFACE connector of your printer, you can print an image from a Bluetooth-compliant mobile phone, digital camera, or other device. Notes · Do not use the DPPA-BT1 outside the area you purchased it. Depending on the area, the use of the adaptor may violate the local radio wave regulations and may be subject to penalty. · In some regions, the Sony DPPA-BT1 Bluetooth USB adaptor is not sold. Maximum number of pixels that can be handled 8 000(H) × 6 000(V) dots (Maximum 5 MB or less) Preparations: connecting DPPA-BT1 Before you start transferring an image or printing, you need the following preparations: 1 2 3 Connect the printer to the AC power source. Insert the Bluetooth adaptor into the PictBridge/EXT INTERFACE connector of your printer. Compatible profiles for Bluetooth communication The DPP-FP85/FP95 supports the following profiles: · BIP (Basic Imaging Profile) · OPP (Object Push Profile) For the profiles that your Bluetooth device supports, please refer to its manual. A profile consists of the standards that enable Bluetooth wireless communication. There are several profiles available, depending on the purposes and product to be used. To make Bluetooth communication possible, the devices used in the communicated should support the same profile. [. . . ] When using a commercially available CompactFlash card adaptor, refer to the operating instructions of the adaptor you use for how to install the card and adaptor. When using the CompactFlash card adaptor, the write-protected card may not work properly. 82 GB Specifications x Printer Printing method Dye sublimation printing (Yellow/ Magenta/Cyan 3 pass) Resolution 300 (H) × 300 (V) dpi Image processing per dot 256 levels processing (8 bits for each Yellow/Magenta/Cyan) Printing range 1 800 dots x 1 200 dots Printing size P (Post Card/4 × 6 inch) size: 101. 6 × 152. 4 mm (maximum, borderless) Printing time (per sheet) Memory card*1*2*3*4: Approx. Input/Output connectors HDMI OUT (output) connector A-TYPE connector, 1 080i (59. 94Hz)/1 080i (50Hz)/720 p (59. 94Hz)/720p (50Hz)/576p (50Hz)/ 480p (59. 94Hz) compatible, BRAVIA Sync compatible USB (USB 2. 0 High Speed) for PC connection PictBridge/EXT INTERFACE connector Slot "Memory Stick" insertion slot SD Card/xD-Picture Card insertion slot CompactFlash card insertion slot Compatible image file formats JPEG: DCF 2. 0 compatible, Exif 2. 21 compatible, JFIF*7 TIFF: Exif 2. 21 compatible BMP*8: 1, 4, 8, 16, 24, 32 bits Windows format Some image file formats are not compatible. Maximum number of pixels to be handled 8 000(H) × 6 000(V) dots (Excluding "Index Print" and part of "CreativePrint") File system FAT12/16/32, sector size 2048 bytes or smaller Image file name DCF format, 256 characters, 8th or less hierarchy Maximum number of files to be handled 9 999 files for a memory card/external device Ink ribbon/Print Paper See supplied "About the Print Packs. " LCD screen LCD panel: DPP-FP85: 6. 2 cm (2. 5 type) TFT drive DPP-FP95: 9. 0 cm (3. 6 type) TFT drive Total number of dots: DPP-FP85: 115 200 (480 × 240) DPP-FP95: 230 400 (320 RGB × 240) Power requirements DC IN jack, 24 V Power consumption While printing: 83 W (maximum) On standby mode: less than 1W Operating temperature 5 °C to 35 °C (41 °F to 95 °F) Dimensions [DPP-FP85] Height: Approx. 149 mm (5 7/8 inches) (including the handle) [DPP-FP95] Height: Approx. [. . . ]