User manual SONY CMT-M700DVD

[. . . ] Do not expose the battery to excessive heat such as direct sunlight, fire or the like. Notice for the customer in the countries applying EU Directives According to the EU Directive related to product safety, EMC and R&TTE, the manufacturer of this product is Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, Japan. The Authorized Representative is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents. Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. [. . . ] Turn down the volume. Adjusting the sound To add a sound effect To Generate a more dynamic sound (Dynamic Sound Generator X-tra) Set the sound effect Press DSGX on the unit. 2 3 4 5 Press VOLUME (or VOL on the unit) . Select the AUDIO IN function. Press AUDIO IN on the unit. Start playing the connected component. Adjust the volume. Press VOLUME +/ (or VOL +/ on the unit) . EQ repeatedly to select "BASS" or "TREBLE, " and then press +/ repeatedly to adjust the level. 1GB Changing the display To Change information on the display1) Check the clock when the system is off 1) Press DISPLAY repeatedly when the system is on. The clock is displayed for 8 seconds. Basic Operations 2) For example, you can view CD/MP3 disc information or the USB device information, such as the track or file number or folder name during normal play, or the total playing time while the player is stopped. The STANDBY indicator on the unit lights up when the system is off. Notes on the display information Characters that cannot be displayed appear as "_". The following are not displayed: total playing time for a CD-DA disc depending on the play mode. total playing time and remaining playing time for an MP3 disc and USB device. The following are not displayed correctly: folder and file names that do not follow either the ISO9660 Level 1, Level 2 or Joliet in the expansion format. The following are displayed: ID3 tag information for MP3 files when ID3 version 1 and version 2 tags are used (up to 62 characters for an MP3 disc). ID3 tag information for "ATRAC" files when ID3 version 2 tags are used. 1GB Other Operations 4 Press ENTER to add the track or file to the program. CD " . " appears when the total program time exceeds 100 minutes for a CD, or when you select a CD track whose number is 21 or over, or when you select an MP3 file. " appears. Creating your own program (Program Play) 1 Select the desired function. CD Press CD to select the CD function. Move the remote closer to the system. 2 Find your problem in the checklist CD/MP3 player The sound skips, or the disc will not play. Move the system to a location away from vibration (for example, on top of a stable stand). Move the speakers away from the system, or place them on separate stands. Press PLAY MODE repeatedly until both "PGM" and "SHUF" disappear to return to normal play. a disc that has not been finalized (a disc to which data can be added). a disc that has many folders. Others If the STANDBY indicator flashes Immediately unplug the power cord, and check the following items. If your system has a voltage selector, is the voltage selector set to the correct voltage? Is anything blocking the ventilation holes on the top or back of the system?After the STANDBY indicator stops flashing, reconnect the power cord, and turn on the system. If the issue persists, contact your nearest Sony dealer. General Sound comes from one channel, or the left and right volumes are unbalanced. Move the system away from sources of noise. Continued 21GB USB device Are you using a supported USB device? [. . . ] TIME NG: The Play Timer start and end times are set to the same time. USB device ATRAC AD: An ATRAC Audio Device is connected. ERROR: The USB device could not be recognized or an unknown device is connected. NO DEVICE: No USB device is connected or the connected USB device has been stopped. STORAGE DRIVE: USB storage media is connected. 2GB Display examples Display indicates 2 (two) 5 (five) 6 (six) 8 (eight) 0 (zero) A B D G H K M O Q R S Z | " $ % , . [. . . ]