User manual SONY CMT-HX30

[. . . ] 3-095-514-13(1) Micro HI-FI Component System Operating Instructions CMT-HX30 CMT-HX3 © 2007 Sony Corporation WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. To reduce the risk of fire or electric shock, do not place objects filled with liquids, such as vases, on the apparatus. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. [. . . ] ID3 tag information for "ATRAC" files when ID3 version 2 tags are used. 1GB Other Operations 4 Press ENTER to add the track or file to the program. CD " . " appears when the total program time exceeds 100 minutes for a CD, or when you select a CD track whose number is 21 or over, or when you select an MP3 file. " appears. Creating your own program (Program Play) 1 Select the desired function. CD Press CD to select the CD function. USB Press USB to select the USB function. Other Operations 5 6 2 3 Press PLAY MODE repeatedly until "PGM" appears while the system is stopped. Press / repeatedly until the desired track or file number appears. When programming files, press +/ repeatedly to select the desired folder, and then select the desired file. Example: When programming tracks on a CD Repeat steps 3 through 4 to program additional tracks or files, up to a total of 25 tracks or files. To play your program of tracks or files, press . The program remains available until you open the disc tray or remove the USB device. To play the same program again, press . To cancel Program Play Press PLAY MODE repeatedly until "PGM" disappears while the system is stopped. To delete the last track or file of the program Press CLEAR while the system is stopped. Selected track or file number Total playing time of program (including selected track or file) 1GB Presetting radio stations You can preset your favorite radio stations and tune them in instantly by selecting the corresponding preset number. Use buttons on the remote to preset stations. 6 To call up a preset radio station, press TUNING MODE repeatedly until "PRESET" appears, and then press +/ repeatedly to select the desired preset number. 1 2 Tune in the desired station (see "Listening to the radio" (page 14)). Press TUNER MEMORY . Preset number 3 Press +/ repeatedly to select your desired preset number. If another station is already assigned to the selected preset number, the station is replaced by the new stations. 4 5 Press ENTER . Repeat steps 1 through 4 to store other stations. You can preset up to 20 FM and 10 AM stations. The preset stations are retained for about half a day even if you disconnect the power cord or if a power failure occurs. 0GB Using the Timers The system offers two timer functions. If you use the Play Timer with the Sleep Timer, the Sleep Timer has priority. This function works even if the clock is not set. 6 7 Select the sound source. Press / repeatedly until the desired sound source appears, and then press ENTER . The display shows the timer settings. Press / to turn off the system. The system turns on 15 seconds before the preset time. If the system is on at the preset time, the Play Timer will not play. Other Operations Press SLEEP repeatedly. If you select "AUTO, " the system automatically turns off after the current disc stops or in 100 minutes. Play Timer: You can wake up to CD, tuner or optional USB device at a preset time. Make sure you have set the clock. To activate or check the timer again Press CLOCK/TIMER SELECT , press / repeatedly until "PLAY SEL?" appears, and then press ENTER . To cancel the timer Repeat the same procedure as above until "TIMER OFF?" appears, and then press ENTER . 1 Prepare the sound source. Prepare the sound source, and then press VOLUME +/ to adjust the volume. To start from a specific track or file, create your own program (page 19). To change the setting Start over from step 1. Tip The Play Timer setting remains as long as the setting is not canceled manually. 2 3 Press CLOCK/TIMER SET . Press / repeatedly to select "PLAY SET?, " and then press ENTER . "ON TIME" appears, and the hour indication flashes. 4 5 Set the time to start playing. Press / repeatedly to set the hour, and then press ENTER . Use the procedure above to set the minutes. Use the same procedure as in step 4 to set the time to stop playing. 1GB Others Troubleshooting 1 Make sure the power cord and speaker cords are correctly and firmly connected. [. . . ] STORAGE DRIVE: USB storage media is connected. Precautions Discs that this system CAN play Audio CD CD-R/CD-RW (audio data/MP3 files) Discs that this system CANNOT play CD-ROM CD-R/CD-RW other than those recorded in music CD format or MP3 format conforming to ISO9660 Level 1/Level 2, Joliet or multisession CD-R/CD-RW recorded in multisession that have not ended by "closing the session" CD-R/CD-RW of poor recording quality, CD-R/CD-RW that have scratches or are dirty, or CD-R/CDRW recorded with an incompatible recording device CD-R/CD-RW which is finalized incorrectly Discs containing files other than MPEG 1 Audio Layer-3 (MP3) files Discs of non-standard shape (for example, heart, square, star) Discs that have adhesive tape, paper, or sticker attached to them Rental or used discs with attached seals where the glue extends beyond the seal Discs that have labels printed using ink that feels tacky when touched Notes on discs Before playing, wipe the disc with a cleaning cloth from the center out to the edge. Do not clean discs with solvents, such as benzine thinner, or commercially available cleaners or anti-static spray intended for vinyl LPs. Do not expose discs to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight. GB On safety Completely disconnect the power cord (mains lead) from the wall socket (mains) if it is not going to be used for an extended period of time. Should any solid object or liquid get into the system, unplug the system, and have it checked by qualified personnel before operating it again. [. . . ]