User manual SONY CMT-CX5BIP

[. . . ] 4-278-006-12 (1) Location of Controls Unit (Top) Getting Started Speakers Power 1 Connect the power cord to the AC adapter. 2 Connect the AC adapter to the unit, and then plug the power cord in to a wall outlet. When you press , the system turns on and the demonstration automatically ends. When you turn off the system, the demonstration appears again on the display. [. . . ] The Play Timer may not be activated depending on the status of the connected iPod/iPhone. Make sure the iPod/iPhone is connected securely. Set the "EQ" setting of the iPod/iPhone to "Off " or "Flat. " Input AUDIO IN (stereo mini jack): Sensitivity 700 mV, impedance 47 kilohms SPEAKERS: Accepts impedance of 8 ohms Outputs Tip The iPod/iPhone does not function. CDplayersection Playing the iPod/iPhone Selected track or file number Total playing time of the selected track or file Press DISPLAY repeatedly when the system is on. The Play Timer setting remains as long as the setting is not cancelled manually. 1 Select the iPod function. Press FUNCTION +/ repeatedly. DISPLAY repeatedly when the system is off. 2) Troubleshooting 1 Make sure the power cord and speaker cords are correctly and firmly connected. 4 Program the selected track or file. Press to enter the selected track or file. 2 Place the iPod/iPhone. 3 Start playback. Press . 5 Repeat steps 3 through 4 to program additional tracks or files, up to a total of 25 tracks or files. 6 To play your program of tracks or files, press . The program remains available until you remove the disc from the disc slot or unplug the power cord. To play the same program again, press . To control the iPod/iPhone To Pause playback Select a track or chapter of audiobook/ podcast Find a point in a track or chapter of audiobook/ podcast Choose the selected item Scroll up/down the iPod menus Return to the previous menu or select a menu Press (pause) / (stop) . To fast-forward or fast-rewind, hold down the button. To cancel Program Play Press PLAY MODE repeatedly until "PGM" disappears while the player is stopped. To delete the last track or file of the program Press CLEAR while the player is stopped. Hold down (rewind)/ (fast forward) during playback, and release the button at the desired point. TOOL MENU /RETURN (return) . For example, you can view CD/MP3 disc information, such as; track or file number track or file name (" ") artist name (" ") album or folder name (" ") total playing time and total number of tracks on the CD-DA disc (only when Normal Play mode is selected and the player is stopped). total number of folders (albums) on the MP3 disc (only when Normal Play mode is selected and the player is stopped). volume label if it exists on the MP3 disc (only when Normal Play mode is selected and the player is stopped). You can also view DAB/DAB+ station information such as the service name, channel label, preset number, frequency, DLS (Dynamic Label Segment), or ensemble label. The STANDBY indicator on the unit lights up when the system is off. 2 Find your problem in the checklist below, and take the indicated corrective action. If the issue persists, contact your nearest Sony dealer. If the STANDBY indicator flashes If the battery of the iPod/iPhone is empty, it may not work with this system. For details, refer to the operation manual supplied with the iPod/iPhone. Because the operation of the system and the iPod/ iPhone are different, you may not operate the iPod/ iPhone using buttons on the remote or unit. In this case, use the control buttons on the iPod/iPhone. System: Compact disc and digital audio system Laser Diode Properties Emission Duration: Continuous Laser Output*: Less than 44. 6µW * This output is the value measurement at a distance of 200mm from the objective lens surface on the Optical Pick-up Block with 7mm aperture. Frequency response: 20 Hz 20 kHz Signal-to-noise ratio: More than 90 dB Dynamic range: More than 90 dB Tunersection FM stereo, FM superheterodyne tuner Tuning range: 87. 5 MHz 108. 0 MHz (50 kHz step) Antenna: FM lead antenna 2) The system offers the following display modes. Display mode Demonstration Power Saving mode2) When the system is off1) The demonstration is turned on. The clock is displayed. To view program information Press DISPLAY repeatedly. Immediately unplug the power cord, and check the following items. After the STANDBY indicator stops flashing, reconnect the power cord, and turn on the system. If the issue persists, contact your nearest Sony dealer. The iPod/iPhone cannot be charged. Precautions Discs that this system CAN play Audio CD CD-R/CD-RW (audio data/MP3 files) If the battery of the iPod/iPhone is empty, the system may not be able to charge it even if you connect it to the system. When charging an iPod/iPhone when the system is off (Standby mode), the system does not perform charging if the iPod/iPhone is fully charged. DAB/DAB+ tuner section: FM stereo, DAB/FM superheterodyne tuner Frequency range* Band-III: 174. 928 (5A) MHz 239. 200 (13F) MHz * For details, see "DAB/DAB+ frequency table" below. Antenna: DAB/FM lead antenna The DAB/DAB+ services are available only in countries/regions that support DAB/DAB+ services. DAB/DAB+ frequency table (Band-III) Frequency 174. 928 MHz 176. 640 MHz 178. 352 MHz 180. 064 MHz 181. 936 MHz 183. 648 MHz 185. 360 MHz 187. 072 MHz 188. 928 MHz 190. 640 MHz 192. 352 MHz 194. 064 MHz 195. 936 MHz 197. 648 MHz 199. 360 MHz 201. 072 MHz 202. 928 MHz 204. 640 MHz 206. 352 MHz 208. 064 MHz Label 5A 5B 5C 5D 6A 6B 6C 6D 7A 7B 7C 7D 8A 8B 8C 8D 9A 9B 9C 9D Frequency 209. 936 MHz 211. 648 MHz 213. 360 MHz 215. 072 MHz 216. 928 MHz 218. 640 MHz 220. 352 MHz 222. 064 MHz 223. 936 MHz 225. 648 MHz 227. 360 MHz 229. 072 MHz 230. 784 MHz 232. 496 MHz 234. 208 MHz 235. 776 MHz 237. 488 MHz 239. 200 MHz Label 10A 10B 10C 10D 11A 11B 11C 11D 12A 12B 12C 12D 13A 13B 13C 13D 13E 13F Discs that this system CANNOT play General The demonstration appears in the display after plugging in the power cord even though the system is not turned on. Press DISPLAY once while the system is off. The demonstration disappears. The ring volume of the iPhone does not change. Adjust the ring volume on the iPhone. Listening to the radio 1 Select the "TUNER DAB" or "TUNER FM". Press FUNCTION +/ repeatedly. Clock3) 1) 2) 2 Perform tuning. For automatic scanning Press TUNING MODE repeatedly until "AUTO" appears, and then press +/ . [. . . ] Move the system to a location away from vibration (for example, on top of a stable stand). Move the speakers away from the system, or place them on separate stands. At high volume, speaker vibration may cause the sound to skip. This system is equipped with an Automatic Standby function. With this function, the system enters Standby mode automatically in about 30 minutes when there is no operation or audio signal output. [. . . ]