User manual SONY CDX-GT530UI annexe 1

[. . . ] Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems) This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. By ensuring these batteries are disposed of correctly, you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery. the recycling of the materials will help to conserve natural resources. In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. [. . . ] With AF or TA on, the emergency announcements will automatically interrupt the currently selected source. Tip If you adjust the volume level during a traffic announcement, that level will be stored into memory for subsequent traffic announcements, independently from the regular volume level. When the AF function is on: this unit's factory setting restricts reception to a specific region, so you will not be switched to another regional station with a stronger frequency. If you leave this regional program's reception area, set "REG-OFF" in setup during FM reception (page 18). This function enables you to select other local stations in the area, even if they are not stored on your number buttons. 1 During FM reception, press a number button ((1) to (6)) on which a local station is stored. The unit starts to search for a station broadcasting the selected program type. Note You cannot use this function in countries/regions where no PTY data is available. Repeat and shuffle play During playback, press (3) (REP) or (4) (SHUF) repeatedly until the desired setting appears. The CT function may not work even though an RDS station is being received. ⷠThere might be a difference between the time set by the CT function and the actual time. For details on the compatibility of your USB device, visit the support site. MSC (Mass Storage Class) and MTP (Media Transfer Protocol) type USB devices compliant with the USB standard can be used. Depending on the USB device, malfunction or damage may occur if it is connected before starting the engine. During playback or fast-forward/reverse of a VBR (Variable Bit Rate) MP3/WMA/AAC file, elapsed playing time may not display accurately. ⷠPlayback of the following MP3/WMA/AAC files is not supported. When using a cable, use the one supplied with the USB device to connect. If a USB device is already connected, to start playback, press (SOURCE) repeatedly until "USB" appears. During playback, press (3) (REP) or (4) (SHUF) repeatedly until the desired setting appears. If you remove your USB device during playback, data in the USB device may be damaged. notes · Do not use USB devices so large or heavy that they may fall down due to vibration, or cause a loose connection. ⷠDo not detach the front panel during playback of the USB device, otherwise USB data may be damaged. [. . . ] ⷠNever touch the connectors directly with your fingers or with any metal device. Halogenated flame retardants are not used in the certain printed wiring boards. ⷠHalogenated flame retardants are not used in cabinets. The following checklist will help you remedy problems you may encounter with your unit. [. . . ]