User manual SONY CDX-GT40U

[. . . ] Notice for customers: the following information is only applicable to equipment sold in countries applying EU Directives The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. the Authorized Representative for EMC and product safety is Sony Deutschland GmbH , Hedelfinger Strasse 61 , 70327 Stuttgart , Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents. Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. [. . . ] Rotate the control dial to select the desired search category, then press it to confirm. *1 CD only *2 USB only When many items are in a category, you can search the desired item quickly. Searching a track by listening to track passages -- ZAPPINTM While playing back short track passages in a CD or USB device in sequence, you can search for a track you want to listen to. ZAPPIN mode is suitable for searching for a track in shuffle or shuffle repeat mode. Press the select button or (ZAP) when a track you want to listen is played back. The track that you select returns to normal play mode from the beginning. Rotate the control dial until the desired menu item appears, then press it. ) AUX VOL*3 (AUX Volume level) Adjusts the volume level for each connected auxiliary equipment: "+18 dB" ­ "0 dB" ­ "­8 dB. " This setting negates the need to adjust the volume level between sources. The following items can be set: EQ7 PRESET (page 14) EQ7 SETTING (page 15) POSITION SET POSITION (Listening Position setting) (page 15) ADJ POSITION*1 (Listening Position adjustment) (page 16) SET SW POS*1 *2 (Subwoofer Position setting) (page 15) BALANCE Adjusts the sound balance: "RIGHT-15" ­ "CENTER" ­ "LEFT-15. Advanced Sound Engine creates an ideal incar sound field with digital signal processing. You can select an equalizer curve from 7 equalizer curves (XPLOD, VOCAL, EDGE, CRUISE, SPACE, GRAVITY, CUSTOM or OFF). Rotate the control dial until "EQ7 PRESET" appears, then press it. Rotate the control dial until the desired equalizer curve appears, then press it. The unit can simulate a natural sound field by delaying the sound output from each speaker to suit your position. FRONT L (): Front left FRONT R (): Front right FRONT (): Center front ALL (): In the center of your car OFF: No position set "CUSTOM" of EQ7 allows you to make your own equalizer settings. Rotate the control dial until "EQ7 SETTING" appears, then press it. Rotate the control dial until "BASE" appears, then press it. You can also set the approximate subwoofer position from your listening position if: ­ the audio output is set to "SUB-OUT" (page 17). 0 kHz Rotate the control dial to adjust the volume level, then press it. Rotate the control dial until "SET POSITION" appears, then press it. Rotate the control dial to select from "FRONT L, " "FRONT R, " "FRONT" or "ALL, " then press it. [. . . ] For details on using the fuse and removing the unit from the dashboard, refer to the installation/connections manual supplied with this unit. If the problem is not solved, visit the support site on the back cover. If the unit is turned off and the display disappears, it cannot be operated with the remote commander. An optional power amplifier is connected and you are not using the built-in amplifier. [. . . ]