User manual SONY CCD-TRV21E

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS1362 (i. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. [. . . ] If you input 13 characters or more for a LARGE title, the title is automatically reduced into a proper size after the position is set. we recommend to set the POWER switch to PLAYER or eject the cassette before you begin. (3) Turn the control dial to select the first line (CUSTOM1) or second line (CUSTOM2), then press the dial. (4) Turn the control dial to select the column of the desired character, then press the dial. (5) Turn the control dial to select the desired character, then press the dial. (7) For finishing the titling work, turn the control dial to select SET, then press the dial. In step 3, select CUSTOM1 or CUSTOM2, depending on which title you want to edit, then change the title. If you take 5 minutes or longer to enter characters while a cassette is in the camcorder The power goes off automatically. Re-recording a picture in the middle of a recorded tape CCD-TR845E only You can insert a scene in the middle of a recorded tape by setting the starting and ending points. Re-recording a picture in the middle of a recorded tape (1) While the camcorder is in Standby mode, keep pressing the + (forward playback) or ­ (reverse playback) side of EDITSEARCH, and release the button where you want to end the insertion [b]. (3) Keep pressing the ­ side of EDITSEARCH and release the button at the point where you want to start the insertion [a]. notes on Date Search and Date Scan mode · If a day's recording is not longer than 2 minutes, the camcorder may not accurately find its boundaries. Date Search and Date Scan do not function on a tape recorded by a camcorder without the Data Code function. Using the Remote Commander, you can easily go back to the desired point on a tape after playback. We recommend you to connect the camcorder to your TV or VCR to view the picture on the TV screen. If the viewfinder indicators do not appear on the TV screen during operation, press DISPLAY on the Remote Commander. The tape stops automatically when the counter reaches approximately zero. Something must be recorded on the tape in order for the tape counter to function. This function is cancelled automatically once the tape is rewound or advanced to the point you pre-registered. You can locate the beginning of a desired programme easily by marking an index signal during recording or playback and searching for it later. We recommend you to connect the camcorder to your TV or VCR to view the picture on the TV screen. If the viewfinder indicators do not appear on the TV screen during operation, press DISPLAY on the Remote Commander. [. . . ] M Disconnect the mains lead of the AC power adaptor or remove the battery pack. M Contact your Sony dealer or local authorized Sony service facility and inform them of the five digits. If you are unable to resolve the problem, contact your Sony dealer or local authorized Sony service facility. System Video recording system 2 rotary heads Helical scanning FM system Audio recording system Rotary heads, FM system Video signal PAL colour, CCIR standards Usable cassette 8mm video format cassette CCD-TR411E/TR412E/TR511E/ TR640E: Standard 8 CCD-TRV21E/TR845E: Hi8 or standard 8 Recording / Playback time (using 90 min. [. . . ]