User manual SONY CCD-TRV11E

[. . . ] You will soon be producing home video that you can enjoy for years to come. To prevent fire or shock hazard, do not expose the unit to rain or moisture. A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS1362 (i. [. . . ] Turn the SEL/PUSH EXEC dial to select [C], then press the dial to delete the title. If you take 5 minutes or longer to enter characters in the standby mode while a cassette is in your camcorder The power automatically turns off. Set the POWER switch to OFF (CHARGE) once, and turn it to CAMERA again, then proceed from step 1. We recommend setting the POWER switch to PLAYER or removing the cassette so that your camcorder does not automatically turn off while you are entering title characters. Using the built-in light You can use the built-in light to suit your shooting situation. The recommended distance between the subject and camcorder is about 1. Press LIGHT until the indicator appears in the viewfinder while your camcorder is in CAMERA mode The built-in light turns on. If you turn the POWER switch to OFF (CHARGE), the built-in light turns off simultaneously. You cannot turn the built-in light on by turning the POWER switch to CAMERA again. To turn on the built-in light again, press LIGHT again in CAMERA mode. To turn off the built-in light To turn on the built-in light automatically press LIGHT until the indicator appears in the viewfinder. The viewfinder screen shows only the items you can operate at the moment. 46) To add special effects like those in films or on the TV to images (p. If you set to 40×/450×, digital zoom is activated and more than 20× to 40×/450× is performed digitally. If you set to 40×/460×, digital zoom is activated and more than 20× to 40×/460× is performed digitally. If you set to 40×/560×, digital zoom is activated and more than 20× to 40×/560× is performed digitally. 39) To record in the 16:9FULL mode To use the NightShot Light function (p. Meaning -- To minimize picture deterioration when editing To correct jitter To not correct jitter. Set TBC to OFF when playing back a tape on which you have dubbed over and recorded the signal of a TV game or similar machine. To reduce picture noise To reduce a conspicuous afterimage when the picture has a lot of movement To play back a tape recorded in the NTSC colour system on a PAL system TV To play back a tape recorded in the NTSC colour system on a TV with the NTSC 4. Note on the playback of the NTSC tapes You can play back tapes recorded in the NTSC video system. When you play back a tape on a Multi System TV, select the best mode while viewing the picture on the TV. [. . . ] Do not operate the unit with a damaged cord or if the unit has been dropped or damaged. Prevent metallic objects from coming into contact with the metal parts of the connecting section. While the unit is in use, particularly during charging, keep it away from AM receivers and video equipment. Do not place the unit in locations that are: ­ Extremely hot or cold ­ Dusty or dirty ­ Very humid ­ Vibrating Use only the specified charger or video equipment with the charging function. [. . . ]