User manual SONY BRAVIA KDL-46W2000

[. . . ] Before operating the TV, please read the "Safety information" section of this manual. A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced with the same rating of fuse approved by ASTA or BSI to BS 1362 (i. When an alternative type of plug is used it should be fitted with the same rating of fuse, otherwise the circuit should be protected by a 13 AMP FUSE at the distribution board. [. . . ] If you know the channel number, you can use the number buttons to directly select a channel. A display appears to confirm that you want to delete all channels from the Favourite list. Switch on the connected equipment, then perform one of the following operation. For equipment connected to the scart sockets using a fully-wired 21-pin scart lead (page 38) Start playback on the connected equipment. For other connected equipment (page 37) Press / repeatedly until the correct input symbol (see below) appears on the screen. Press TOOLS to display the following options when viewing pictures from connected equipment other than PC. "MENU" allows you to enjoy various convenient features of this TV. You can easily select channels or inputs sources and change the settings for your TV. To watch the desired external input, select the input source, then press . Displays the Settings menu where most of the advanced settings and adjustments are performed. Selects whether to apply settings made in the Picture menu to all inputs, or only to the input currently being watched. Resets all picture settings except "Target Inputs", "Picture Mode" and "Display Mode" to the factory settings. "Backlight" is not available when you set "Power Saving" to "High" (page 29). tip "Warm1" and "Warm2" can only be selected when you set "Picture Mode" to "Custom". When you set "Picture Mode" to "Custom", you can set/change these settings. it will increase the contrast distinction of the darker picture scenes. "Gamma": Adjusts the balance between bright and dark areas of the picture. "Live Colour": Makes colours more vivid and reproduces clear skin tones. "Live Colour" is not available when "Colour Space" is set to "Normal". Selects whether to apply settings made in the Sound menu to all inputs, or only to the input currently being watched. Resets the sound settings except "Sound Mode", "Dual Sound" and "i Speaker Link" to the factory settings. Adjusts the volume level of the current input relative to other inputs, when "Target Inputs" is set to "Viewing Only". [. . . ] If the equipment has a DVI socket, connect the DVI socket to the HDMI IN 4 socket through a DVI - HDMI adaptor interface (not supplied), and connect the equipment's audio out sockets to the audio in HDMI IN 4 sockets. The HDMI sockets only support the following video inputs: 480i, 480p, 576i, 576p, 720p, 1080i and 1080p. DVD player with component output F Video game equipment, DVD player or decoder G When you connect the decoder, the scrambled signal from the TV tuner is output to the decoder, then the unscrambled signal is output from the decoder. DVD recorder VCR Decoder Video game equipment DVD player Decoder Press TOOLS to display the following options when viewing pictures input from the connected PC. [. . . ]