User manual SONY BRAVIA KDL-40D3500

[. . . ] Before operating the TV, please read the "Safety information" section of this manual. Before operating the TV, please read this manual thoroughly and retain it for future reference. Any functions related to Digital TV ( ) will only work in countries or areas where DVB-T (MPEG2) digital terrestrial signals are broadcast or where you have access to a compatible DVB-C (MPEG2) cable service. Please confirm with your local dealer if you can receive a DVBT signal where you live or ask your cable provider if their DVB-C cable service is suitable for integrated operation with this TV. [. . . ] Resets all the "Picture" settings except "Target Inputs", "Picture Mode" and "Display Mode" to the factory settings. z "Warm 1" and "Warm 2" are not available when "Picture Mode" is set to "Vivid". When you set "Picture Mode" to "Cinema", "Photo" or "Standard", you can set/change these settings. it will increase the contrast distinction of the darker picture scenes. "Gamma": Adjusts the balance between bright and dark areas of the picture. You can select the options listed below on the "Sound" menu. Selects whether to apply settings made in the "Sound" menu to all inputs, or only to the input currently being watched. Resets all the "Sound" settings except "Target Inputs", "Sound Mode", "Dual Sound", "i Speaker Link" and "i Dual Sound" to the factory settings. Adjusts the volume level of the current input relative to other inputs, when "Target Inputs" is set to "Viewing Only". Gives sound more impact by compensating for phase effects in speakers. "A"/"B"/"Mono": For a bilingual broadcast, select "A" for sound channel 1, "B" for sound channel 2, or "Mono" for a mono channel, if available. ~ If you select other equipment connected to the TV, set "Dual Sound" to "Stereo", "A" or "B". However, when the external equipment connected to the HDMI socket is selected, this is fixed to "Stereo". Switches the TV's internal speakers on/off when headphones are connected. Selects the sound from the headphone for a stereo or bilingual broadcast, which depends on the "Dual Sound" selection. You can select the options listed below on the "Screen" menu. Selects whether to apply settings made in the "Screen" menu to all inputs, or only to the input currently being watched. For details about the screen format, see "To change the screen format manually to suit the broadcast" on page 14. Automatically changes the screen format according to the broadcast signal. Even if "Auto Format" is set to "On" or "Off", you can always modify the format of the screen by pressing repeatedly. "Full Pixel": Displays the picture for 1080i or 1080p (except for component input) sources in the original size when parts of the picture are cut off. "-1"/"-2": Enlarges the picture to hide the edge of the picture. [. . . ] "System Information": Displays the current software version and the signal level. "Time Zone": Allows you to manually select the time zone you are in, if it is not the same as the default time zone setting for your country/region. "Auto DST": Sets whether or not to automatically switch between summer time and winter time. "Off": The time is displayed according to the time difference set by "Time Zone". [. . . ]