User manual SOLAC CE4490

[. . . ] â· Do not switch the coffee maker on without making sure that the voltage stated on the specifications plate matches that in your home. â· Do not operate the coffee maker without water in the tank. â· Steam and water may come out of the coffee output at certain times. [. . . ] If at any time you see water coming out of the top of the filter holder, move it to the right to ensure that it is completely closed. 3 Fit the cup-holder tray (12) according to the size of the cups you are going to use (Fig. 5 When the coffee dispenser pilot light turns green (2), press the switch to start dispensing coffee. 6 When you have dispensed the desired amount of coffee, press the switch (2) again to stop dispensing. If you have used ground coffee, clean the grounds by placing the filter holder under running water. , The coffee and/or steam dispenser switch pilot light will come on (green) when it is ready. 2 Insert the steam nozzle (9) into the liquid to be heated and gradually open the steam control (8). Always handle the steam nozzle (9) using the protective handle (10), to avoid potential burns. 3 After use, we recommend you clean any traces of coffee from the inside. To do this: 4 Place an empty container underneath it, turn on the steamer switch (8) again and let the steam out. 5 If you are going to use the steamer (9) continually to heat a significant amount of liquid (approx. More than 100 ml), proceed as follows: when there is no pressure left, close the steam control (8), wait until the dispenser pilot light (2) comes on again and press the dispenser switch until a small amount of water comes out of the coffee outlet area. 6 If you want to make coffee after using the steam nozzle, it is advisable to allow two cups of water to run out through the filter holder (with no coffee in the filter) to ensure that the next cup of coffee comes out at the right temperature. Before using the coffee machine for the first time, we recommend allowing the equivalent of 8-10 cups of water to run through the filter holder (with no coffee in the filter). â· Use the dispenser spoon (15) to measure the correct amount of coffee. â· If the coffee seems to be coming out too slowly, the grind is too fine. [. . . ] , If you want the first cup of coffee to hotter, put the filter holder in place without coffee and let one or two cups of hot water run out to warm up the components of the coffee maker. Make sure you do not use too much coffee (2 level spoonfuls at the most); otherwise the filter holder will not close properly. ) We recommend de-scaling the appliance once a year using a special product For coffee machines so as to maintain the coffee maker in perfect condition. [. . . ]