User manual SMITH CORONA WS200MAN

[. . . ] All memories and carrier position will be maintained. 5 -4- CHANGING Changing The Ribbon Cassette 1) Move the print carrier to the center of the platen using the SPACE or . 2) Hold the ribbon cassette on both sides and lift up the front portion (where the ribbon is exposed) to remove the cassette. 3) To insert a new cassette, place the back end of the cassette on the cassette holder on the carrier and gently press down on the front of the cassette unit it clicks into place. 4) Turn the ribbon feed knob counter-clockwise again to take up any slack in the ribbon. [. . . ] 3) When the decimal point (. ) is typed, the text will be printed out with the decimal point. 4) To print the text, press the RETURN , TAB or CODE + DEC TAB key. Centering Your typewriter allows you to automatically center a line. The carrier will move to the center position between the left and right margins. 3) To print the text, press the RETURN , TAB or CODE + DEC TAB key. Right Margin Flush Your typewriter can automatically Print the text flush with the right margin. 3) To print the text, press the RETURN . Checking Your Spelling (OPTION) Your typewriter offers a spellchecker. The line is printed when you press the RETURN , TAB or CODE + 8 (MODE) key. You can type in new text while the previous line is being printed. JUST (Justification) This mode allows you to justify a line. When you type a character over the right margin, the entire line is automatically printed out, justified between the left and right margin, and the carrier returns to the left margin. * If you press the TAB or RETURN key while typing on a line, text will be printed out immediately and will not be justified. 13-12- WORD PROCESSOR MODE Pre-Description The WP mode will make your typing easier and more efficient. Repetitive phrases, terminology and entire letters can be stored, edited and recalled (printed) at will. You can toggle between WP and TW modes by pressing the CODE + 7 (TW/WP) key. 1 : dp 4 : prn 2 : np 5 : ls 3 : edit 6 : del Memory All Clear When you need to make memory available for a new file and if you want to delete all contents of memory, Press the CODE + Q key in TW mode. * If memory is broken by electric shock or mis-operation, press the CODE + Q key in TW mode to clear the memory. File Operation 1. dp (Direct Print) At the main menu, you can select "dp" mode by pressing the 1 key. In this mode, a new file is created and characters typed will be displayed, printed and stored by pressing the RETURN , TAB or CODE + ESC key. np (No Print) At the main menu, you can select "np" mode by pressing the 2 key. edit At the main-menu, you can select "edit" mode by pressing the 3 key. use cursor & et RET utilisez le curseur RET nom: aaa aaa name: When you want to end editing in the above modes, press the ESC key. The changes you have made will be stored to the previous named file automatically. Press the RETURN key to select or the cursor key ( , ) to change the file. use cursor & et RET utilisez le curseurRET nom: aaa aaa name: After selecting the printing file, the following message will be displayed. Mar Cur/Sto-C/S If the margin format you want to use is: - the current format, press the C key. [. . . ] - Be sure the printwheel and ribbon cassette have been properly in stalled. Corrections cannot be made. MAINTENANCE We recommend that your typewriter be adjusted, serviced, and lubricated by a qualified service technician at least once a year. If you need help, contact your local dealer for checking your machine. * NOTE: For best performance, try to use only standard supplies from your dealer. [. . . ]