User manual SMITH CORONA OFFICE2000CHAP4

[. . . ] -- Quickly moves cursor to the left margin. -- Quickly moves cursor to the space following the last Adv then character displayed on the line. -- Shows prior approximately 38 characters of text. Code + -- Moves typing position down equal to your line setting (i. e. , if you are double spacing text, key moves typing position down two lines). Code + -- Moves typing position up equal to your line setting (i. e. , if you are double spacing text, key moves typing position up two lines). [. . . ] 3. + 4 $` Manual Underscore You can also manually underscore text which has already been printed. Position the print hammer under the first character of the text to be underscored. Press Shift + (- / _ ) to add an underscore beneath a character. Shift Paper In + 3. Centering Text Auto Center Code 1. + Type Text @ç 2 Press Code + Auto Center (2). A beep is heard, and the display prompts: Auto Center @ and indicates the print hammer/cursor position. 2. Type the text to be centered. Press Return again to deactivate Auto Center and move the carriage to the left margin. NOTE: When Auto Center is activated, the Settings feature is not functional. Return 3. Reloc 4. 4-4 -- Line Mode Smith Corona Corporation Indented Paragraph To indent a paragraph, set "temporary left margins, " so text is automatically indented after carriage returns. The example below shows a paragraph which has been indented five spaces. National Accounting Seminar Marvelous Paper Products will participate in the National Accounting Seminar. Those attending will include one Sales Account Executive from each of our Sales Districts, two System Consultants and two Field Service Technicians. When Auto Return is active or when the Return is pressed, the print hammer returns to the indented position. Text types, and the paper advances one line and returns to the original margin. The Status Line prompts: Indent OFF. Code + ¢~ 6 Changing Settings You can change the end of page setting, line spacing, impression control, pitch and number of lines displayed in Line Mode. Settings are saved with the file, so you will not need to update these settings each time you recall and print an existing file. (See "Page Layout. ") NOTE: If you change pitch, remember to change the printwheel. Settings Code &[ + 7 Smith Corona Corporation Line Mode -- 4-5 Corrections Typing errors can be corrected both before and after a line is printed. When an error has been printed, you must use the Off-Line and Forward Correct features. Corrections on the Display You can correct characters on the display before they are printed by typing over the error, inserting additional text, or using the Correct, WordEraser, and LineEraser keys. Position Cursor Insert Code Inserting Text 1. The cursor becomes a blinking rectangle indicating that you are in Insert Mode. Press the Code + Reloc (Return) to return to your previous cursor position. NOTE: If Auto Return is activated and an insertion moves text beyond the right margin, the line prints to that point when Insert is deactivated and any remaining text remains on the display. + Type Correction 4. Be sure to activate Bold or Underscore if you want the replacement text enhanced. [. . . ] (The cursor must be on the character, not the space following the character. ) For example, to swap "eh" as in the example above, position the cursor on " h. " End of Page Pitch Line Impression Keyboard Teh Position Cursor Code + The The W 11 10 1 M I 12 Position the cursor on teh second of of the two characters 2. The character currently selected will be swapped with the preceding one. In the example above, "eh" would become " he. " The cursor relocates after the right most corrected character. Smith Corona Corporation Line Mode -- 4-7 Correcting Printed Text You can use Off-Line Correction and Forward Correction if the error has already been printed. Off-Line Correction Position Print Hammer 1. [. . . ]