User manual SIMRAD TRANSDUCER MOUNTING PROCEDURE SCHEMA REV B

[. . . ] A / ISBN-13: N/A Rev. A 26. 04. 2010 First version. Copyright ©2010 Kongsberg Maritime AS The information contained in this document remains the sole property of Kongsberg Maritime AS. No part of this document may be copied or reproduced in any form or by any means, and the information contained within it is not to be communicated to a third party, without the prior written consent of Kongsberg Maritime AS. The document, or any part of it, may not be translated to any other language without the written approval from Kongsberg Maritime AS. Disclaimer Kongsberg Maritime AS endeavours to ensure that all information in this document is correct and fairly stated, but does not accept liability for any errors or omissions. Warning The equipment to which this manual applies must only be used for the purpose for which it was designed. [. . . ] Improper use or maintenance may cause damage to the equipment and/or injury to personnel. The user must be familiar with the contents of the appropriate manuals before attempting to install, operate or work on the equipment. Kongsberg Maritime AS disclaims any responsibility for damage or injury caused by improper installation, use or maintenance of the equipment. Support information If you require maintenance or repair, contact your local dealer. You can also contact us using the following address: simrad. support@simrad. com. On the web site you will also find a list of our dealers and distributors. Kongsberg Maritime AS www. kongsberg. com Software download and installation Table of contents ABOUT THIS DOCUMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 SOFTWARE DOWNLOAD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 SOFTWARE PROCEDURES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Note that minimum hardware and software requirements must be met by the computer. If your computer is not fitted with a CD or DVD drive, copy the files from the CD to a USB memory stick. If the installation program does not start automatically, use a file manager to access the CD or USB memory stick. Once the installation has been completed, double-click the program icon on the desktop to start the application. 346906/A 7 Simrad TRANSDUCER MOUNTING PROCEDURE 6 7 If you use Windows 7 operating system: a Observe that Windows 7 Firewall will open a dialog requesting information about the network. This chapter is provided in the TRANSDUCER MOUNTING PROCEDURE Operator manual and TRANSDUCER MOUNTING PROCEDURE Reference manual. How to obtain the TRANSDUCER MOUNTING PROCEDURE license The TRANSDUCER MOUNTING PROCEDURE requires a valid license to operate. Without a license you will not be able to communicate with the TRANSDUCER MOUNTING PROCEDURE Receiver. Note If you replace your computer, or if you replace major components inside your computer, you will need a new license code. You may for example write it down in the beginning of the reference manual. [. . . ] You may for example write it down in the beginning of the reference manual. 1 2 Double-click the TRANSDUCER MOUNTING PROCEDURE icon on the desktop to start the application. Click the Setup icon under the Main menu to open the Setup sub-menu. 3 Click Installation to open the Installation sub-menu. On the sub-menu, click Software License to open the Software License dialog. 4 5 6 7 Write down the Hardware ID provided by the Software License dialog. [. . . ]