User manual SIMRAD PI32 CATCH SENSOR MOUNTING REV A
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SIMRAD PI32 CATCH SENSOR. We hope that this SIMRAD PI32 CATCH SENSOR user guide will be useful to you.
You may also download the following manuals related to this product:
SIMRAD PI32 CATCH SENSOR MOUNTING REV A (86 ko)
Manual abstract: user guide SIMRAD PI32 CATCH SENSORMOUNTING REV A
Detailed instructions for use are in the User's Guide.
[. . . ] PI32 Catch sensor attachment
Sensor attachment - to a net with an approximate mesh size of 140 mm is illustrated below. [. . . ] Attachment - the catch sensor 's orientation toward the mother vessel is maintained by the steel/nylon attachment rings, strops and karabiners bent to the net. The number of mesh squares the sensor is supported between must be restricted to avaoid unnecessary stress on the gear when the net is filled to maximum capacity. Note that both steel attachment rings must be located on the same side of the sensor. Sensitivity - is determined by the number of mesh squares separating the two rubber strops (a larger number increases sensitivity, a smaller reduces it). Simulate sensor activation by stretching the net's mesh to approximate the load generated by a full catch. Experiment accordingly to determine the correct attachment points and then permanently mark their locations for future reference. [. . . ] Strops with cracks or visible signs of damage should be changed immediately.
(851-164643A) [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SIMRAD PI32 CATCH SENSOR
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SIMRAD PI32 CATCH SENSOR will begin.
