User manual SIMRAD PI PORTABLE HYDROPHONE INSTALLATION REV C

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SIMRAD PI PORTABLE HYDROPHONE. We hope that this SIMRAD PI PORTABLE HYDROPHONE user guide will be useful to you.


SIMRAD PI PORTABLE HYDROPHONE INSTALLATION REV C: Download the complete user guide (227 Ko)

Manual abstract: user guide SIMRAD PI PORTABLE HYDROPHONEINSTALLATION REV C

Detailed instructions for use are in the User's Guide.

[. . . ] Simrad AS shall not be liable for errors contained herein, or for incidental or consequential damages in connection with the furnishing, performance, or use of this document. The equipment to which this manual applies must only be used for the purpose for which it was designed. Improper use or maintenance may cause damage to the equipment or injury to personnel. [. . . ] (A) = Portable hydrophone (P) = Port (S) = Starboard When the seine is normally located forward of the starboard beam when pursing the following information should be taken into consideration: · The portable hydrophone is to be deployed over the port side of the vessel, midships, as far away from bow or stern thruster(s) used when pursing as possible. · Note that the portable hydrophone's location is opposite to that of a permanently mounted unit. When pursing to starboard the hydrophone is normally lowered over on the port side of the vessel. · The hydrophone cable should be made fast to the vessel's bulwarks. 851-164730 / Rev. C 3 Simrad PI Catch monitoring system / Portable hydrophone Paravane arrangement The portable hydrophone available with the PI system has a broad coverage area. For this reason, its orientation with regard to the sensors is not that critical. The hydrophone weighs approximately 700 grams (in salt water) and can be mounted on a towed paravane. This solution is suitable for smaller vessels, and it is made up of a little paravane and a weight. The arrangement is designed to draw the portable hydrophone down to approximate five to ten meters depth when towed at a moderate speed (maximum of three knots). The kit contains all necessary parts (except one!) as described in the following illustration. Order number: KIT-207284 4 851-164730 / Rev. C Installation manual Paravane arrangement, parts The relevant part numbers in the arrangement kit are provided in brackets. Note that the hydrophone is NOT a part of the paravane kit, it must be ordered seperately. (3) Paravane line, a two meter length of thin flag halyard (or the equivalent) shackled to the round thimble and the middle of the three holes available on the paravane (699-078608). (4) Hydrophone cable, extending approximately a half meter aft of the round thimble. Note that the length of the paravane line (3) is four times longer than the hydrophone cable (4). [. . . ] (A) Towed hydrophone, included with portable type hydrophone (314-203863). (G) Bight, in hydrophone cable secured with an elastic strop to dampen dynamic stress on the hydrophone cable, not available from Simrad. 6 851-164730 / Rev. C Installation manual Portable hydrophone storage The portable hydrophone and cable must not be left on deck unattended when not in use. · Take care so that the cable does not chafe due to the motion of the vessel. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SIMRAD PI PORTABLE HYDROPHONE




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SIMRAD PI PORTABLE HYDROPHONE will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.