User manual SIMRAD PI CONFIGURATOR SW 4.10 SOFTWARE RELEASE NOTE REV D

[. . . ] Software release note Simrad PI Configurator SW 4. 10 Introduction This document describes the release of software version 4. 32 for the PI Configurator application. [. . . ] This new version of the PI Configurator software will - when used with the PI CIC interface unit - handle all old and current PI and PS sensors. The latest hardware and software developments put to use in the sensors will also require this combination. Older versions of the PI Configurator will not work on the latest sensors. The old types of interface cables will also prove unoperational on the latest sensor electronics. For these resons, we strongly advice all users to upgrade to the latest software version, and to put the PI CIC unit to use. Documentation The PI Configurator instruction manual and on-line help has been revised. The manuals are now also available in Spanish. Turn the page for more information! www. simrad. com TECHNOLOGY FOR SUSTAINABLE FISHERIES Software release note How to install the new SW The new software version is distributed on an ISO file. Burn the ISO on a CD using the "burn image to disk" feature (or equivalent) 3. If you have an old version of the PI Configurator on your computer, remove it. [. . . ] · PI Configurator CD: 882-208829 · PI CIC: 326157 300272 / Rev. C / September 2008 Simrad Kongsberg Maritime AS Strandpromenaden 50 P. O. Box 111 N-3191 Horten, Norway Telephone: +47 33 03 40 00 Telefax: +47 33 04 29 87 www. simrad. com simrad. sales@simrad. com [. . . ]