User manual SIMRAD OUTLINE DIMENSIONS SCHEMA REV B

[. . . ] Released for SW 2. 1. X. Copyright ©2010 Kongsberg Maritime AS The information contained in this document remains the sole property of Kongsberg Maritime AS. No part of this document may be copied or reproduced in any form or by any means, and the information contained within it is not to be communicated to a third party, without the prior written consent of Kongsberg Maritime AS. The document, or any part of it, may not be translated to any other language without the written approval from Kongsberg Maritime AS. Disclaimer Kongsberg Maritime AS endeavours to ensure that all information in this document is correct and fairly stated, but does not accept liability for any errors or omissions. Warning The equipment to which this manual applies must only be used for the purpose for which it was designed. Improper use or maintenance may cause damage to the equipment and/or injury to personnel. [. . . ] · Make sure that you do not delete the file name extension . bmp. Click the necessary characters on the on-line keyboard to build a new file name. Click the Close button in the parameter dialogue when you have completed the new file name. On-screen keyboard 6 7 8 Figure 10 You are also permitted to change the file name on images in the Temporary files field. However, if you wish to transfer the chosen image to the Permanent files field afterwards, you will find that the new file name is changed by the transfer process. How to print sonar images 1 Click the Setup tab to open the menu. 323773/B 35 Simrad OUTLINE DIMENSIONS 2 3 4 5 Click the Store/Recall button to open the Store/Recall menu. Click the Print button below the files to print the selected image. The image will be sent to the default printer connected to the Processor Unit. You are not allowed to control the output size and format. How to burn sonar images on a CD The OUTLINE DIMENSIONS Processor Unit is provided with a CD player capable of burning blank CDs. Observe the following procedure to burn selected sonar images on a blank CD. Do not attempt this while the sonar is in use searching for fish! Note This procedure assumes that you have basic knowledge of file management in Windows. To access the operating system functions, you can click any Help button. When the help window opens, you can also access the Taskbar with the Start button. The track parameters can be investigated by accessing the Objects menu. When the Auto Tilt function is activated in the Position Track mode the tilt search centre is automatically adjusted with regard to the distance to the tracked position. How to enable target track Observe this procedure to initiate a target track. Press the Target track button in the Train field on the Operating Panel. A circle with dedicated identification (A) will appear on the display and its position will automatically be tracked by the system using the strongest echo centred in the track window (B) represented by the two bars on the audio line. The size of the track window may be selected using the Track Window button in the Setup menu. Figure 11 Target tracking with related symbols E A C B 1P D (CD015005L) The vector (C) originating from the target's centre indicates its course and speed. The length of the vector increases relative to the target's speed. A course line (D) can also be displayed showing the target's track. A point ahead of the target indicates you position 323773/B 39 Simrad OUTLINE DIMENSIONS after a given time, and this time can be set using the Movements button on the Setup menu. Target tracking symbols and data are displayed with a light violet colour. How to add a target tracking line Observe this procedure to add a tracking line to a tracked target to indicate its movement history. Procedure 1 2 3 4 Choose an operational mode with a horizontal presentation. Observe that a short-cut menu appears on the display. 5 6 Click View Menu, and observe that the GeoView menu opens. Click the Target track button on the GeoView menu. 7 8 Observe that the Target track parameter dialog opens below the menu. [. . . ] The faster the blades move, the lower the pressure around it will become. As it reaches vapour pressure, the water vaporizes and forms small bubbles of gas. This is cavitation. 323773/B 69 Simrad OUTLINE DIMENSIONS Figure 16 Cavitation [1] When the bubbles collapse, they cause very strong local shock-waves in the water. In addition to this, the cavitation will generate very strong reverberation, commonly seen as a red stripe of echoes behind the vessel. [. . . ]