User manual SIMRAD FS20

[. . . ] FS 20/25 OPERATORS MANUAL 901-10037001 Issue 1. 1 June 2002 FS 20/25 Operators Manual List of Contents 901-10037001/1. 1 Page 1 Kongsberg Simrad Mesotech Ltd Products Warranty Policy Effective January 1, 2002 Kongsberg Simrad Mesotech Ltd. Warrants each new product (equipment) to be free of defects caused by faulty materials or poor workmanship for a period of twelve (12) months for underwater equipment and twenty-four (24) months for surface equipment from date of installation by an authorized Kongsberg Group Company, Simrad Distributor, Dealer or Agency. The warranty does not apply to defects caused by, force majeure events or misuse, including water damage to the surface equipment, improper maintenance and installation, including excessive wear and tear for which Kongsberg Simrad mesotech Ltd. Is not responsible. Underwater Equipment: · Warranty for underwater Equipment that is hull mounted such as those mentioned below will be assessed on a case-by case basis but shall generally not be covered by the warranty. 1. [. . . ] By clicking on the individual window, you can rearrange, change the size, as you prefer, etc. Refer to the following window From that point on by clicking on the "FS 20", TS 15 Sounder or the FS 25 window you will have control over the selected Sonar. The sonar you have selected will be highlighted by a blue bar across the top. . Kongsberg Simrad Mesotech Ltd. Port Coquitlam, BC - Canada 901-10037001/1. 1 Page 4. 20 4. 4. 6 Display Settings FS 20/25 Operators Manual FS 20/25 Installation, System Set-Up and Test Position the cursor on the "DISPLAY SETTINGS" Icon, (the one next to the small sonar head located on the TOOL BAR), and CLICK. By selecting the appropriate "KEY", you will able to setup your Colors, Controls Setting and the Head Sensors. By clicking on the appropriate "key" you will be able to change the color i. e. The same operation will apply to the TS15 S sounder, and the FS25 windows Kongsberg Simrad Mesotech Ltd. Port Coquitlam, BC - Canada FS 20/25 Operators Manual FS 20/25 Installation, System Set-Up and Test 901-10037001/1. 1 Page 4. 21 4. 4. 7 Control Setting By selecting and clicking on the "Control" key on the above window, the following window will pop up. By clicking on the appropriate key, you will be able to setup your control setting, i. e. Note: The "Timer Control" will be turn "ON" automatically when you CLICK on the "S" Icon located on the "Tool Bar". The same operation will apply to the TS 15 S sounder and the FS 25 windows Kongsberg Simrad Mesotech Ltd. Port Coquitlam, BC - Canada 901-10037001/1. 1 Page 4. 22 4. 4. 8 Head Sensors Setting FS 20/25 Operators Manual FS 20/25 Installation, System Set-Up and Test By selecting and clicking on the "Head Sensors" key on the above window, the following window will pop up. By clicking on the appropriate key, you will be turning the catch sensor ON or OFF. Note: The "Heads Sensors" will be turn "ON" automatically when you CLICK on the "S" Icon located on the "Tool Bar". You can turn "ON" or "OFF" the catch Sensors individually if required. The "Catch Alarm" may be turn "ON" or "OFF" using this menu by clicking in the appropriate check box. Note: The Catch, Depth and Temp will not apply to the FS 25 window. Kongsberg Simrad Mesotech Ltd. Port Coquitlam, BC - Canada FS 20/25 Operators Manual FS 20/25 Installation, System Set-Up and Test 901-10037001/1. 1 Page 4. 23 4. 4. 9 FS 20 Head Setting Position the cursor on the "CONTROL HEAD" key, (The one with the small sonar head located on the TOOL BAR) and CLICK. The following window below will pop up. By clicking on the appropriate "KEY", you will be able to setup your Scan option. You also have full control of the Scan mode via the operator control panel. Mote: The "Tilt" and "Stabilization" is only available on the FS25 System. Kongsberg Simrad Mesotech Ltd. Port Coquitlam, BC - Canada 901-10037001/1. 1 Page 4. 24 4. 4. 10 Transmit Setting FS 20/25 Operators Manual FS 20/25 Installation, System Set-Up and Test By selecting and clicking on the "Transmit" key on the above window, the following window will pop up. By clicking on the appropriate key, you will be able to setup your Transmitter configuration in order to optimize fish detection. The same operation will apply to the TS 15 S sounder and the FS 25 Windows Kongsberg Simrad Mesotech Ltd. Port Coquitlam, BC - Canada FS 20/25 Operators Manual FS 20/25 Installation, System Set-Up and Test 901-10037001/1. 1 Page 4. 25 4. 4. 11 TVG Page Setting By selecting and clicking on the "TVG Page" key on the above window, the following window will pop up. By clicking on the appropriate key, you will be able to setup your TVG setting. You also have the option of customizing your TVG setting for a specific fishery. The same operation will apply to the TS 15 S Sounder and the FS 25 windows. Kongsberg Simrad Mesotech Ltd. Port Coquitlam, BC - Canada 901-10037001/1. 1 Page 4. 26 FS 20/25 Operators Manual FS 20/25 Installation, System Set-Up and Test 4. 4. 12 Info By selecting and clicking on the "INFO" key on the above window, the following window will pop up. This INFO page will provide you with all the relevant information on the sonar head attached to the system. The same window will apply to the FS 25 System Kongsberg Simrad Mesotech Ltd. [. . . ] Jumpers will be required to breakout the signals for connection to a handheld multi-meter. There are DC voltages on the trawl cable that are capable of delivering a lethal electric shock!The minimum voltage at the trawl unit is 55 Vdc and the current should be approximately 250 mA with sonar head only connected and 325 mA with both sonar head and sensor module (current readings will vary depending on operation mode i. e. , scan speed and range, etc. ). This test is recommended more for a service representative than ship's personnel in the field. [. . . ]