User manual SIMA SRF

[. . . ] 90-day Limited Warranty Sima Products Corporation warrants this product against defects in materials and workmanship for a period of 90 days from the date of purchase. During the warranty period, the product will be repaired or replaced at Sima's option. [. . . ] This warranty gives you specific legal rights and you may have other rights, which vary from state to state. RF Signal Modulator Model SRF Sima Products Corporation 140 Pennsylvania Ave Bldg #5 Oakmont, PA 15139 800-345-7462 www. simacorp. com e-mail us at custserv@simacorp. com © 2003 Sima Products Corporation PN21679 User Manual Introduction: Congratulations on your purchase of Sima's RF Signal Modulator (Model SRF). This unit will enable any VHF television set to receive signals from all A/V video equipment such as DVD players, video game systems, satellite receivers, camcorders and more. The RF Signal Modulator converts the separate Audio and Video input signals into normal VHF signals for television. It also has a built-in Auto Switching feature that re-routes the external in and out sources to the TV set when a video signal is not detected. This package includes: 1 RF signal modulator 1 AC to DC power adapter (12V DC, 150 ma) 1 user manual (this document). FCC Conformity: This device complies with Part 15 Rules of the Federal Communications Commission. Operation of the SFR RF Modulator is subject to the following two conditions. This device must accept interference received, including interference that may cause undesired operation Connection: You will need one A/V cable with RCA style jacks and two 75 Ohm coaxial cables with F-type connectors (not included) to connect it between a video input source and your TV set. Connect a pair of RCA-style cables from the "Audio out" jacks on your A/V equipment (DVD, video game, satellite receiver) to the "Audio In" jacks of the RF modulator. Connect an RCA-style cable from the "Video out" jack on your A/V equipment (DVD, video game, satellite receiver) to the "Video In" jack of the RF modulator. [. . . ] Move the switch on the back of the RF Modulator to the channel (3 or 4) you want to use for the A/V signal. Change the "ohms" switch on the RF Modulator to the position that gives you the best picture quality, typically 75 ohms. Input Impedance (ohms) Level (Vp-p) Output Frequency MHz Level (dBuv) Specifications Audio Video 75 or 1K 13K 1 0. 4 Channel 3 61. 25 +/- 100KHz 66 +/- 3. 5 TV 75 N/A Channel 4 67. 25 +/-100KHz 66 + /- 3. 5 [. . . ]