User manual SIMA SL-9X

[. . . ] Need additional Video Accessories? Try Sima's ST-11K mini tripod with universal clip!This pocket tripod conveniently provides the support you need for a steady camcorder or cell phone photo shoot. [. . . ] Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal right and you may also have other rights which vary from state to state. Sima's Mini-Zoom mic, Model MZM-1, lets you zoom in on the audio your want while camcording your favorite events. Weddings, graduations and the holidays never sounded so good. Register online at www. simacorp. com and receive special offers and discounts Self-powered compact video light Model SL-9X Register online at www. simacorp. com Call 800-345-7462 for information Introduction The Sima Xenon Universal Video Light Model SL-9X can be mounted on the accessory shoe of any camcorder by sliding it into place and tightening the mounting screw. If your camcorder does not have a shoe mount, the Sima Video Bracket, (Model SVB-1) can provide a mounting platform. The SL9X also comes with a universal clip for use with camera phones. To charge the batteries: 1. Insert the jack on the power cord into the power input jack on the side of the SL-9 (Fig. Note: Light does not work with AC adapter plugged in unit's power jack. Unplug after 810 hours charging. Special Notes The SL-9X video light can also be operated with two standard AAA alkaline batteries. Running time will be less than when using the rechargeable NiMH batteries included with your unit. Supplying current to non-rechargeable batteries can cause them to leak or explode and may damage the unit. Specifications Lamp: 3W Xenon lamp Power: 2 AAA NiMH batteries Run Time: 20 to 25 min. Size: 2. 75" x 1. 5" Batteries. The SL-9X comes with two rechargeable AAA NiMH batteries. Use the supplied AC adapter/charger to charge the batteries. Warning! [. . . ] B © 2005 Sima Products Corporation P/N 21717 Made in China Printing instructions: · Manual is to be printed two-sided in black ink on white paper. · Manual is folded so that front cover with Sima logo and picture of SL-9 is showing. [. . . ]