User manual SIEMENS GIGASET SL910A

[. . . ] Gigaset SL910/910A / GBR/IRL / A31008-M2300-L101-1-7619 / Cover_front. fm / Congratulations By purchasing a Gigaset, you have chosen a brand that is fully committed to sustainability. To learn more, visit www. gigaset. com. Gigaset SL910/910A / GBR/IRL / A31008-M2300-L101-1-7619 / Cover_front. fm / Gigaset SL910/910A / GBR/IRL / A31008-M2300-L101-1-7619 / introduction. fm / 08. 12. 2011 Gigaset SL910/SL910A ?with the special "touch" Congratulations on your purchase of the first Gigaset with touchscreen. This phone sets new standards with its high-quality genuine metal frame, 3. 2" TFT colour touchscreen and excellent sound quality and, last but by no means least, its impressive interior qualities. [. . . ] If the handset is already registered to four bases: Touch the base where the registration should be overwritten, e. g. , Base 2. 8 digits) and confirm with . If six handsets are already registered to the base (all internal numbers are assigned), the base automatically tries to de-register the last handset registered. If this attempt is not successful, e. g. , because this handset has a connection to the base, the message No free internal number appears. In this case, de-register another handset that is no longer required and repeat the registration procedure. Version 4. 1, 21. 11. 2007 68 Gigaset SL910/910A / GBR/IRL / A31008-M2300-L101-1-7619 / Register-HS. fm / 08. 12. 2011 Using multiple handsets Registering other handsets to the Gigaset SL910/SL910A base You can register other Gigaset handsets and handsets for other devices with GAP functionality as follows. 1) On the base Press and hold the registration/paging key ( page 8) on the base (approx. 3 seconds). 2) On the handset Start to register the handset as described in the user guide. Assigning the internal number The base assigns the handset the lowest free internal number (possible numbers: 1?6). The internal name of the handset is displayed in idle status, e. g. , INT 2. This means that internal number 2 has been assigned to the handset. De-registering handsets In the Settings menu ( page 25), touch [ Handsets and Base]. Proceed in accordance with one of the following two scenarios: u You want to de-register the handset currently being used: Touch De-register. If the handset is still registered to other bases, it switches to the base with the best reception (Best Base; page 70). Press Yes to confirm. Locating a handset ("paging") Briefly press the register/paging key on the base ( page 8). All the handsets ring simultaneously ("Paging"), even if the ringtones are deactivated (Exception: Handsets where room monitor is activated). Ending the search On the base: Press the register/paging key again briefly, or On the handset: Press c or a or touch [ ?3 minutes, the paging call will end automatically. u An incoming external call will not interrupt the paging call. u If there are already two internal connections between the handsets/to the Please note Version 4. 1, 21. 11. 2007 answering machine (Gigaset SL910A), then a paging call is not possible. 69 Gigaset SL910/910A / GBR/IRL / A31008-M2300-L101-1-7619 / Register-HS. fm / 08. 12. 2011 Using multiple handsets Changing the base If your handset is registered to more than one base, you can set it to a particular base or to the base that has the best reception (Best Base). Select the desired base or Best Base ( = set). Changing the name of a handset The names "INT 1", "INT 2" etc. Confirm with . Making internal calls Internal calls to other handsets registered to the same base are free of charge. If necessary, select the handset from the list or touch All Handsets. After opening the list, press c to initiate a group call to all handsets. Internal consultation/internal transfer Prerequisite: You are conducting an external call. If more than two handsets are registered to the base, select one handset or All. Please note If there are already two internal connections between the handsets/to the answering machine (Gigaset SL910A), then an internal consultation call is not possible. Transferring (connecting) an external call to the other handset You can transfer the external call either before the internal participant answers or afterwards. If the internal participant does not answer or is busy, a recall from the external participant occurs automatically (after approx. Version 4. 1, 21. 11. 2007 70 Gigaset SL910/910A / GBR/IRL / A31008-M2300-L101-1-7619 / Register-HS. fm / 08. 12. 2011 Using multiple handsets Accepting/rejecting call waiting External call during an internal call Accept the call: Touch Accept. Reject the call: Touch Reject. Internal call during an external call You will hear a single beep tone and receive a corresponding message. The internal caller hears the engaged tone. Establishing a conference call/call swapping During an external call, you have set up an internal consultation call or accepted an internal call waiting. You return to "call swapping" and are again connected to the participant with whom you initiated the conference call. [. . . ] If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. [. . . ]