User manual SIEMENS GIGASET SL400H

[. . . ] 2a, D-46395 Bocholt Manufactured by Gigaset Communications GmbH under trademark license of Siemens AG. 2011 Gigaset products bearing the trademark 'Siemens' will exclusively use the trademark 'Gigaset'. Pour des conversations inspires. H 004LS Gigaset SL400H your high-quality accessory Gigaset SL400H your high-quality accessory Congratulations, you are holding the slimmest and smallest Gigaset there has ever been. This phone sets new standards with its high-quality genuine metal frame and metal keypad, 1. 8 " TFT colour display and incorporated functions. [. . . ] The room monitor call to an external number is terminated after approximately 90 seconds. The room monitor call to an internal number (handset) stops after approx. When the room monitor is activated, all keys are locked except the end call key. The handset's speaker is muted. v Room Monitor You can enter data in the following fields: Activation: Select On to activate. External number: Select the number from the directory (press display key ) or enter it manually. Internal number: Select display key Change Select handset or Call All to call all registered handsets OK. In idle status, the destination number or the internal destination number is displayed. Press Save to save the settings. Activating the room monitor and entering the destination number 24 Using Bluetooth devices Changing the set destination number v Room Monitor Enter and save number as described in "Activating the room monitor and entering the destination number" ( page 24). To use the phone numbers, dialling codes (country and area code) must be stored in the directory ( page 31). You will find a description of how to operate your Bluetooth devices in the user guides for these devices. Cancelling/deactivating the room monitor Activating/deactivating Bluetooth mode v Activation Press Change to activate or deactivate Bluetooth mode ( = activated). Press the end call key a to cancel the call when the room monitor is activated. In idle status, press the display key Off to deactivate room monitor mode. Registering Bluetooth devices The distance between the handset in Bluetooth mode and the activated Bluetooth device (headset or data device) should be no more than 10 m. u If you register a headset, any headset Deactivating the room monitor remotely Prerequisites: The phone must support tone dialling and the room monitor should be set for an external destination number. The other room monitor settings on the handset (e. g. , no ringtone) will remain activated until you press the display key Off on the handset. To reactivate the room function with the same phone number: Reactivate and save with Save ( page 24). Please note that is already registered will be overwritten. u If you would like to use a headset with your handset that is already registered to another device (e. g. , to a mobile phone), please deactivate this connection before you start the registration process. v Search for Headset/Search Data Device The search can take up to 30 seconds. ~ Enter the PIN for the Bluetooth device you want to register and press OK. The device is saved in the list of known devices. Using Bluetooth devices Before you can use your Bluetooth device, activate Bluetooth, ensure the devices are visible and then register the handset. You can also register up to five data devices (PCs, PDAs and mobile phones) to send and receive directory entries as vCards or exchange data with the computer ( page 37). 25 Using Bluetooth devices Cancelling/repeating current search To cancel search: Cancel Press the display key. Repeat Search Select and press OK. Rejecting/accepting an unregistered Bluetooth device If a Bluetooth device that is not registered in the list of known devices tries to connect with the handset, you will be prompted on the display to enter the PIN for the Bluetooth device (bonding). u Accept ~ Enter the PIN for the Bluetooth device you want to accept and press OK. If you have accepted the device, you can use it temporarily (i. e. , as long as it is within receiving range or until you deactivate the handset) or save it to the list of known devices. Once the device's PIN has been confirmed Save to the list of known devices: press display key Yes. Use temporarily: press display key No. Editing the list of known (trusted) devices v Known Devices A corresponding icon appears next to each device name in the list displayed: Icon Open list Meaning Bluetooth headset Bluetooth data device If a device is connected, the corresponding icon is shown in the header of the display instead of . [. . . ] Never use a dry cloth as this can cause static. The device is supplied with the recommended battery. Handset operating times/charging times The operating time of your Gigaset depends on the capacity and age of the battery and the way it is used. (All times are maximum possible times). Standby time (hours) * Talktime (hours) Operating time for 1. 5 hrs of calls per day (hours) ** Charging time in charger (hours) 230/95 14 120 3 Contact with liquid ! If the handset should come into contact with liquid: 1. Pat all parts dry, then place the handset with the battery compartment open and the keypad facing down in a dry, warm place for at least 72 hours (not in a microwave, oven etc. ). When it has fully dried out, you will usually be able to use it again. * without/with display backlight ** without display backlight ("Setting the display backlight" page 28) General specifications DECT standard GAP standard No. [. . . ]