User manual SIEMENS GIGASET S79H

[. . . ] 2a, D-46395 Bocholt Manufactured by Gigaset Communications GmbH under trademark license of Siemens AG. 2011 Gigaset products bearing the trademark 'Siemens' will exclusively use the trademark 'Gigaset'. INSPIRING CONVERSATION. H 97S Gigaset S79H more than just a telephone Gigaset S79H more than just a telephone Your telephone sets new standards for the way you communicate at home. The configuration and user interface of the cordless phone are excellent, providing you with first-class voice quality in speaker mode, while the USB port offers you enormous flexibility. [. . . ] You have the following options: View Press the display key and edit or confirm the entry. or Options Open the menu for editing, deleting and activating/deactivating. Signalling appointments and anniversaries An appointment reminder is signalled in idle status for 60 seconds with the selected ringtone at the volume that has been set for internal calls ( page 43). During the reminder call, you can permanently change the volume by pressing the side keys (louder) or (quieter). The name is displayed for anniversaries, while the entered text is displayed for appointments along with the date and time. Deleting all appointments for one day Options Delete all Appts. OK Meeting 03. 11. 09 15:38 Off SMS Confirm the security prompt with Yes. All appointments are deleted. You can either deactivate or answer an appointment reminder: Off Press the display key to deactivate the appointment reminder. or: SMS Press the display key to respond to the appointment reminder with an SMS. Please note During a call, the appointment reminder is only signalled by a short tone. 36 Setting the Alarm Clock Displaying missed appointments, anniversaries Missed appointments/anniversaries ( page 30) are displayed in the Missed Alarms List if: u You do not accept an appointment/anniversary. u The handset is deactivated at the time of the appointment/anniversary. u Automatic Redial was activated at the time of an appointment/anniversary ( page 31). Open the list by selecting the message key f ( page 32) or via the menu: v Missed Alarms Select appointment/anniversary. A missed appointment is displayed with the appointment name and a missed anniversary is displayed with the last name and first name. If ten entries are already stored in the list, the next appointment reminder will delete the oldest entry. Setting the Alarm Clock Prerequisite: The date and time have already been set ( page 13). v Alarm Clock You can enter data in the following fields: Activation: Select On or Off. A wake-up call is signalled on the display and with the selected ringtone ( page 3). If no key is pressed, the wake-up call is repeated twice at five minute intervals and then switched off. While the wake-up call sounds, you can permanently change the volume by pressing the side keys (louder) or (quieter). During a call, the wake-up call is only signalled by a short tone. Activating/deactivating the Alarm Clock and setting the wake-up time 37 Using a handset as a Room Monitor Deactivating the wake-up call/ repeating after a pause (Snooze mode) Prerequisite: A wake-up call is sounding. After the second repetition the wake-up call is deactivated completely. If you accept an incoming call, the Room Monitor is suspended for the duration of the call, but the function remains activated. If you deactivate then reactivate the handset, the Room Monitor remains activated. u Always check the operation of the Warning! Using a handset as a Room Monitor If the Room Monitor is activated, a previously saved destination number is called as soon as a set noise level is reached. You can save an internal or external number in your handset as the destination number. All of the handset keys are deactivated, with the exception of the display keys. The Room Monitor call to an external number is terminated after approximately 90 seconds. The Room Monitor call to an internal number (handset) is terminated after approximately 3 minutes (depending on the base). [. . . ] Unplug the power supply and/or remove the battery from the handset immediately. Place the device (handset with the battery compartment open and the keypad facing down) in a dry, warm place for at least 72 hours (not in a microwave, oven etc. ). When it has fully dried out, you will normally be able to use it again. . 6, 5 7, 5 8, 5 10, 5 * without/with display Backlight ** without display Backlight (Setting the display Backlight page 41) Due to the constant progression in battery development, the list of recommended batteries in the FAQ section of the Gigaset Customer Care pages is regularly updated: www. gigaset. com/customercare 52 Appendix General specifications DECT standard GAP standard No. of channels Is supported Is supported 60 duplex channels u The first letter of the name of Directory entries is automatically capitalised, followed by lower case letters. Setting upper/lower case or digits Repeatedly press the hash key # to change the text input mode. [. . . ]