User manual SIEMENS GIGASET S455

[. . . ] EN Dear Customer, Gigaset Communications GmbH is the legal successor to Siemens Home and Office Communication Devices GmbH & Co. Any statements made by Siemens AG or SHC that are found in the user guides should therefore be understood as statements of Gigaset Communications GmbH. Sehr geehrte Kundin, sehr geehrter Kunde, die Gigaset Communications GmbH ist Rechtsnachfolgerin der Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), die ihrerseits das Gigaset-Geschft der Siemens AG fortfhrte. [. . . ] If the ID is invalid, the SMS will not be delivered. Deactivating a mailbox Set On/Off: to Off . All SMS saved in this mailbox will be deleted. Set Protection: to Off . The mailbox PIN is reset to "0000". Deactivating PIN protection 27 SMS (text messages) Setting SMS centre Entering/changing SMS centres SMS to a PABX Calling Line Identification is forwarded to the extension of the PABX (CLIP). The CLIP of the phone number for the SMS centre is evaluated in your Gigaset. u If required, you must prefix the number for the SMS centre with the access code (depending on your PABX). by sending a text message to your own number: once with and once without the access code. u When you send SMS messages, your sender number may be sent without your extension number. Sending and receiving SMS on ISDN PABXs is only possible via the MSN number assigned to your base station. u You can only receive an SMS when the and special functions offered by your service provider before you make a new application and/or before you delete pre-configured call numbers. Change multiple line input: Active Send: Select Yes if the text messages are to be sent via the SMS centre. Enter the number of the SMS service and insert a star if your service provider supports personal mailboxes. Save changes (page 53). You should find out about the services Please note: Ask your service provider for details of how you should enter service numbers if you wish to use personal mailboxes (requirement: your service provider supports this function). Activating/deactivating the SMS function When you switch off you cannot send or receive any SMS with your phone. the call numbers of the SMS centres) and the entries in the incoming and outgoing message lists are saved when you switch off your phone. Or: 1 OK Activate SMS function (default settings). Sending an SMS through another SMS centre Activate the SMS centre (2 to 4) as send Send the SMS. centre. 28 SMS (text messages) SMS troubleshooting Errors when sending E0 Calling Line Identification permanently withheld (CLIR) or Calling Line Identification not activated. FD Connection to SMS centre failed, see selfhelp. The message is played back. Have your service provider enable this service (there is a charge for this). 2. Mobile phone operator and network SMS service provider have not agreed on a cooperation. Obtain information from your network SMS service provider. Self-help with errors The following table lists error situations and possible causes and provides notes on troubleshooting. You cannot send messages. You have not requested the CLIP service (Calling Line Identification Presentation). No number or an invalid number is entered for the SMS centre activated as the send centre. Enter the number (page 28). You receive a message whose text is incomplete. Tell your SMS contacts your new ID or undo the change (page 27). 2. Call diversion is activated with When: All Calls or the call diversion All Calls is activated for the network mailbox. [. . . ] Press the Save display key to confirm the selection Press the s key. a Press and hold the end call key until the handset returns to idle status. Press and hold (idle status). The fourth line is marked with [ ] to show it is active. Then press and hold the a key. The handset changes to idle status. 53 Notes on the operating instructions Writing and editing a text message The following rules apply when writing a text message: u Control the cursor with u v t s. u The first letter of the name of directory entries is automatically capitalised, followed by lower case letters. Writing an SMS (with predictive text) EATONI predictive text helps you when you are writing an SMS. Each key between Q and O is assigned several letters and characters (see the character set tables, page 54). [. . . ]