User manual SIEMENS GIGASET E49H

[. . . ] 1 Display in idle status 2 Charge status of the batteries = e V U (flat to full) = flashes: batteries almost flat e V U flashes: batteries charging 3 Display keys (¢ page 15) 4 Message key Access to calls and message lists; Flashes: new message or new call 5 End call key, On/Off key End call, cancel function, go back one menu level (press briefly), back to idle status (press and hold), activate/deactivate handset (press and hold in idle status) 6 Hash key Keypad lock on/off (press and hold in idle status); Toggle between upper/lower case and digits 7 Call-by-call list key Open call-by-call list 8 Connection socket for headset (¢ page 12) 9 Microphone 10 Recall key - Consultation call (flash) - Insert a dialling pause (press and hold) 11 Star key Ringer on/off (press and hold), With an open connection: switch between dial pulsing/touch tone dialling (press briefly); Text input: Open table of special characters 12 Key 1 Dial network mailbox (press and hold) 13 Talk key Answer a call, open last number redial list (press briefly), start dialling (press and hold) 14 Handsfree key Switch between handset and handsfree mode; Lights up: handsfree activated; Flashes: incoming call 15 Control key (¢ page 14) 16 Eco Mode enabled (¢ page 26) 17 Eco Mode + enabled (¢ page 26) Using the phone . Accepting a call and Calling line identification (Russian AON or CallerID) . Explain their content and the potential hazards associated with using the telephone to your children. Never use a conventional (non-rechargeable) battery or other battery types as this could result in significant health risks and personal injury. [. . . ] The calls list or the last number redial list, or during a call can be copied to the directory. If you have CNIP, the first 16 characters of the transmitted name are copied to the Name line. The following functions can be selected with q: Display Number (as in the directory ¢ page 23) Copy to Directory Copy an entry to the directory (¢ page 22). There are many operating situations in which you can open the directory, e. Opening lists with the message key An advisory tone sounds as soon as a new message arrives in a list. If you press the message key f, you access the lists that contain new messages. The last number redial list contains the twenty numbers last dialled with the handset (max. If a number is in the directory or the call-by-call list, then the corresponding name will be displayed. When a name is displayed, you can display the corresponding phone number by pressing the display key §View§. The network mailbox is your network provider's answering machine within the network. You cannot use the network mailbox unless you have requested it from your network provider. When a message is recorded, you receive a call from the network mailbox. If you have requested Calling Line Identification, the network mailbox number will be displayed. If you do not accept the call, the network mailbox number will be saved in the missed calls list and the message key flashes (¢ page 24). If no key is pressed, the wake-up call is repeated twice at five minute intervals and then switched off. By using a power-saving adapter plug, your telephone consumes less power. After the second repetition the wake-up call is deactivated completely. The radiation can only be reduced if your base supports this function. The transmission power of your telephone is automatically reduced depending on the distance to the base. You can reduce the radiation of the handset and base even further by using Eco Mode or Eco Mode+. Using a handset as a room monitor If the room monitor is activated, a previously saved destination number is called as soon as a set noise level is reached. You can save an internal or external number in your handset as the destination number. [. . . ] The aim of our global activity is to secure sustainable life resources for humanity. We are committed to a responsibility for our products that comprises their entire life cycle. The environmental impact of products, including their manufacture, procurement, distribution, use, service and disposal, are already evaluated during product and process design. The use of ECO DECT (¢ page 26) saves energy and is an active contribution towards protecting the environment. [. . . ]