User manual SIEMENS GIGASET C460 IP

[. . . ] EN Dear Customer, Gigaset Communications GmbH is the legal successor to Siemens Home and Office Communication Devices GmbH & Co. Any statements made by Siemens AG or SHC that are found in the user guides should therefore be understood as statements of Gigaset Communications GmbH. Sehr geehrte Kundin, sehr geehrter Kunde, die Gigaset Communications GmbH ist Rechtsnachfolgerin der Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), die ihrerseits das Gigaset-Geschäft der Siemens AG fortführte. [. . . ] You can enter further SMS centres and register with them with the help of the registration wizard. To find out how to do this, please read the full user guide for your Gigaset C460 IP (page 5). If you are interrupted by an external call whilst writing the SMS, it is automatically saved in the draft message list. Receiving/reading SMS All received SMS messages are saved in the message list. Linked SMS messages are divided into individual SMS messages with a maximum of 153 characters, and saved as such in the incoming message list. New SMS messages are signalled on all Gigaset C46 handsets by a message in the display, the flashing message key f and an advisory tone. Please note: Reading a text message ¤ Open the incoming message list with ¤ ¤ Writing/sending/saving SMS An SMS may contain up to 160 characters. s/~ Enter the number with dialling code (including your local area code) from the directory or key it in manually, and press §OK§. For SMS to an SMS mailbox: put the mailbox ID at the end of the number. The SMS is sent. the message key f (page 22) or via Menu§ ¢ SMS ¢ Incoming 01+05. Select SMS Select Menu§ ¢ Read SMS and press OK§. Managing SMS lists You can use the incoming message and draft message lists to, e. g. : u Delete individual SMS or the entire list u Forward or reply to an SMS menu. ¤ Select SMS and press §Menu§ to open the For additional information, please see the full user guide for your Gigaset C450 IP on the Internet at www. siemens. com/gigaset. 23 Setting handset/base station Setting handset/base station The handset and base station are preset, but you can change these settings to suit your individual requirements. You will find the relevant functions in the submenus §Menu§ ¢ Settings and §Menu§ ¢ Audio Settings (page 14). The base station settings are carried out using a registered Gigaset C46 handset. Setting the ringer volume The ringer volume is the same for all types of ring. §Menu§ ¢ Audio Settings ¢ Ringer Volume Or in idle status: t Press briefly. Then: q Adjust the volume and press §OK§. a Press and hold (idle status). Adjusting the loudspeaker volume You can set the loudspeaker volume for handsfree talking to five different levels and the earpiece volume to three different levels. q Adjust the volume and press §OK§. Activating/deactivating the ringer tone You can turn off the ringer tone on your handset before you take a call or while the phone is in idle status. You can take a call as long as it is displayed on the screen. Deactivating the ringer tone P Press the star key and hold until the Ú icon appears in the display. Press and hold the star key in idle status. Re-activating the ringer tone P Please note: The handsfree volume can only be adjusted when this function is set. If t is assigned a different function, e. g. Make settings (see above). Activating/deactivating advisory tones §Menu§ Select and press §OK§ ( = on). All advisory tones are activated or deactivated. ¢ Audio Settings ¢ Advisory Tones 24 Setting handset/base station Using the handset as an alarm clock Activating/deactivating the alarm clock §Menu§ Changing the base station system PIN You can change the base station's 4-digit default system PIN ("0000") to a 4-digit PIN known only to yourself. §Menu§ ¢ Settings ¢ Base ¢ System PIN ~ Enter current system PIN and press §OK§. For security reasons, "****" is displayed instead of the numbers entered. a Press and hold (idle status). ¢ Alarm Clock ¢ Activation ( = on) After you activate the alarm clock, the menu for setting the wake up time opens automatically (page 25). Setting the wake up time §Menu§ ¢ Alarm Clock ¢ Wake up time ¤ Enter the wake up time in hours and minutes, then press §OK§. When the alarm clock rings. . . Alarm repeat after 5 minutes Press the display key or any key. If you press §Snooze§ three times the alarm clock switches off for 24 hours. §Snooze§ Restoring the handset default settings Each individual handset setting is reset, in particular the language, display, volume, ringer tone, advisory tones and alarm clock settings (page 24). Entries in the directory, the date and time, the calls list and the handset's registration to the base station will be retained. [. . . ] This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. [. . . ]