User manual SIEMENS GIGASET A680

[. . . ] When it has fully dried out, you will normally be able to use it again. ECO WDCT You are helping to protect the environment with your Gigaset A680. If you give your Gigaset to someone else, make sure you also give them the user guide. Please remove faulty base stations from use or have them repaired by our service, as they could interfere with other wireless services. Disposal Batteries should not be disposed of in general household waste. Observe the local waste disposal regulations, details of which can be obtained from your local authority. [. . . ] ¢ OK ¢ ~ (enter number) ¢ OK ¢ ~ (enter number) ¢ OK Storing a number in the directory h ¢ MENU ¢ New Entry ¢ OK ¢ ~ (enter number) ¢ OK ¢ ~ (enter number) ¢ OK Selecting a directory entry Open the directory with h. You have the following ¢ Accepting a call The handset indicates an incoming call by ringing and by a display on the screen. When Auto Answer is activated (see Menu tree page 13), simply remove the handset from the base station/charging cradle. In idle status, use t to activate the menu for setting the call volume and use u to set the volume. ¢ options: Use u to scroll through the entries until the required name is selected. Enter the first character of the name and scroll to the entry with u, if required. Calling Line Identification When you get a call, the caller's number will be displayed on your handset; the caller's name will be displayed if it is stored in the directory. Preconditions: 1 You have asked your network provider for the caller's number (CLIP) to be displayed on your handset screen. 2 The caller has asked the network provider for his number to be identified (CLI). ® appears in the display if you have not requested Calling Line Identification, Withheld appears if the caller has withheld CLI, and Unavailable appears if CLI has not been requested. Dialling with the directory h ¢ u (select entry) ¢ c Using other functions h ¢ u (select entry) ¢ MENU New Entry Show Number Use Number The following functions can be selected with u: Save new phone number. Delete all entries. u (select entry) ¢ MENU Delete Entry Copy to Dir. Date/Time Status The following functions can be selected with u: Delete current entry. All old and new entries will be deleted. Calling back a caller from the calls list f ¢ CallsList 01+02 ¢ OK ¢ u (select entry) ¢c Assigning key 1 for fast access to the network mailbox Simply press and hold key 1 on the handset and you will be connected directly to the network mailbox. See Menu tree page 13. ¢ 9 Locating a handset ("paging") You can locate your handset using the base station. Briefly press the registration/paging key on the base station (¢ page 1). All handsets will ring simultaneously ("paging"), even if the ringer tones are deactivated. End paging: briefly press the register/paging key on the base station (¢ page 1) or the talk key c on a handset. Using several handsets Making internal calls Internal calls are no-cost calls to other handsets that are registered to the same base. To end the call, press a. Internal consultation call/connecting a call You are in conversation with an external participant. Before the internal participant has answered, press the end call key a; the call is diverted to the participant who answers the call. Press the end call key a; the call is diverted, or press the display key "; you are reconnected to the external participant. Registering handsets You can register up to four handsets on your base station (Gigaset A68H) recommended). Please note: Each additional handset must be registered on the base station in order for it to work properly!For automatic registration of handsets to Gigaset A680, see page 5. ¢ Manual registration of handsets to Gigaset A680 1. On the handset: MENU ¢ Settings ¢ OK ¢ Handset ¢ OK ¢ Register HS ¢ Enter the system PIN of the base station (default is 0000) ¢ OK. Registering flashes in the display. Listening in to an external call You are conducting an external call. An internal participant can listen in on this call and take part in the conversation (conference). [. . . ] Tones 2-4 Battery Low During a conversation 2-4-1 Off 2-4-2 On 2-4-3 During Call Warning tone to indicate battery is almost flat: never always only during a call 3 Settings Enter date (DDMMYY format), then time (HHMM format) 3-2-1 Language 3-2-2 Auto Answer 3-2-3 Register HS 3-2-4 Reset Handset Set the display language Automatically activate/deactivate auto answer Manually register the handset Reset the handset 3-1 Date/Time 3-2 Handset ¢ page 9 ¢ page 10 ¢ page 7 3-3 Base 3-3-1 System PIN 3-3-2 Base Reset 3-3-3 Listening in 3-3-4 Preselection Change system PIN (default is 0000) Restore factory settings Activate/deactivate the function 3-3-4-1 Presel. Number ¢ page 10 ¢ page 9 Network provider dialling code, should be inserted automatically before the dialled phone number. First digits of the dialling codes, should be dialled with preselection. First digits of dialling codes, should be dialled without preselection. 3-3-4-2 With Preselect 3-3-4-3 Without Presel 4 Voice Mail 4-1-1 Netw. [. . . ]